1. DDz Quorum FoolTrottel Posted October 16, 2019 Author 1. DDz Quorum Posted October 16, 2019 Guess what I did today? The only thing that remains to be seen is whether the four hour cycle will work: The process called DCS.exe will be killed from the processor after four hours - but there are two DCS.exe's running on it now... not sure what will happen! But, we will found out in a few hours. I guess... Oh, and SRS has been updated to 1.6.4.0 as well. ( What's the use? I dunno ) Quote
1. DDz Quorum DD_Fenrir Posted October 16, 2019 1. DDz Quorum Posted October 16, 2019 Thanks FT, you are a proper gem. X Quote
1. DDz Quorum DD_Fenrir Posted May 30, 2020 1. DDz Quorum Posted May 30, 2020 DCS Dogz, please note that the server is now running 2.5.6 Stable and I have requested it to remain on Stable for the foreseeable to keep it available for those Dogz members who do not partake in the OpenBeta. I ran a test on it this afternoon and whilst the Supercarrier appears, even for those of us who own the module, we are unable to spawn, takeoff or trap on it, I assume because the Server does not 'own' the module. I will converse with FT at the next available opportunity to see if and how we can get around this issue. Quote
1. DDz Quorum FoolTrottel Posted May 30, 2020 Author 1. DDz Quorum Posted May 30, 2020 Okay, uuhhmmhm, let me see and have a look at this issue ... Quote
1. DDz Quorum DD_Fenrir Posted May 30, 2020 1. DDz Quorum Posted May 30, 2020 Wierd! I logged on round 3pm BST and selecting Tomcat 200 which is specifically intended to hot spawn on the super carrier and it threw me in air start. Flew a mission, killed some stuff, came back to the super carrier and it refused me permission to land! Confused!?!? Quote
1. DDz Quorum FoolTrottel Posted May 30, 2020 Author 1. DDz Quorum Posted May 30, 2020 Sure, but I must confess... I logged on to DCS on the server, using my own credentials, and thus I could install the Supercarrier module. Next, started the Dserver under the DangerDogz account, and ... yeah, I could spawn in on the deck... (I did not take off in the 14, so did not attempt to land, and thus never asked for permission to land!) Quote
DD_Arthur Posted May 30, 2020 Posted May 30, 2020 Just logged onto DangerDogz server. Hot-started on the deck and managed to drive my Tomcat over the side of the Super Carrier Didn't see any little men though..... Quote
1. DDz Quorum DD_Fenrir Posted May 30, 2020 1. DDz Quorum Posted May 30, 2020 In that case Arthur you'd have been on the old Stennis - which I have left in for those without the Super carrier module. Tomcats in the 200 range and hornets in the 300 range are on the new carrier. Quote
1. DDz Quorum FoolTrottel Posted May 30, 2020 Author 1. DDz Quorum Posted May 30, 2020 I think I got into an F14 #326 group on the Supercarrier? I did not, my bad! Quote
DD_Arthur Posted May 30, 2020 Posted May 30, 2020 Yeah I can believe it was the Stennis but how come FT's got pictures of little men? Confused..... Edit; Just selected 200 range Tomcat and deffo spawned on SC..... Quote
Kira Posted May 31, 2020 Posted May 31, 2020 3 hours ago, DD_Arthur said: Yeah I can believe it was the Stennis but how come FT's got pictures of little men? Confused..... Edit; Just selected 200 range Tomcat and deffo spawned on SC..... That's definitely the Super(duper) Carrier. Quote
2. Administrators fruitbat Posted May 31, 2020 2. Administrators Posted May 31, 2020 I've just been messing around on our server, and could take off and land both the 14 and 18 on the super duper carrier 1 Quote
1. DDz Quorum DD_Fenrir Posted May 31, 2020 1. DDz Quorum Posted May 31, 2020 Yeah.... Popped on last night and lo and behold, no issue spawning or landing on t' super carrier with Tomcat. The mind boggles... Quote
1. DDz Quorum FoolTrottel Posted October 10, 2020 Author 1. DDz Quorum Posted October 10, 2020 New attempt at running two DCS dedicated server sessions/missions on our server, both are running stable version: One is closed, one is open. The open one is running a generic mission, not specifically a good DF one - but there will be one, some day soon. The way I did it this time, is to have a secondary user logged on to the server - as one can have two logged on at the same time. Besides DCS twice, CloD is now also running the Tobruk mission and the BoB missions on the same server, the same way. This all should save me from having to run a separate little server at home so... that's the positive thing about it. Whether our own server will be able to handle it, remains to be seen. Quote
1. DDz Quorum FoolTrottel Posted April 1, 2021 Author 1. DDz Quorum Posted April 1, 2021 So, yeah, the Stable version on our server is being updated. For the channel map. No need to buy it. It's just a command that must be executed: DCS_Updater.exe install THECHANNEL_terrain For future reference, here's a link to a table of like all DCS modules, with their names in it: Modules! (And the thing I did buy back then, that I never did not need to not buy was the Normandy Map + Asset pack ... ) Quote
1. DDz Quorum FoolTrottel Posted April 1, 2021 Author 1. DDz Quorum Posted April 1, 2021 (BTW, I tried it, shot down all of the luftwaffles, picked up the entire crew of a channel ditched bomber, landed in France, took off and brought me back the coolest nicest French farmer's daughter you can come across, she speaks English ánd Dutch ... ) 1 Quote
1. DDz Quorum FoolTrottel Posted May 13, 2021 Author 1. DDz Quorum Posted May 13, 2021 DCS_updater.exe install PERSIANGULF_terrain DCS_updater.exe install NEVADA_terrain DCS_updater.exe install SYRIA_terrain Have been executed now on the OpenBeta Server - well, it's still running Syria - 55GB. Is that like ... okay? 1 1 Quote
1. DDz Quorum FoolTrottel Posted May 22, 2021 Author 1. DDz Quorum Posted May 22, 2021 Have added the T-45 to the OpenBeta server now. Could not add it to a carrier, as I would not now how Mind you, the T-45 now has to be installed on your DCS Openbeta to be able to connect to our OB server! (Same as with the A-4E-C!) Quote
Crash Posted May 23, 2021 Posted May 23, 2021 Thank you FT I will try it out later. It works. 1 Quote
1. DDz Quorum FoolTrottel Posted June 30, 2021 Author 1. DDz Quorum Posted June 30, 2021 Our OpenBeta server is being updated with the Marianas map at the moment! C:\DCS-OB\bin>DCS_UPDATER.EXE install MARIANAISLANDS_terrain Quote
T_O_A_D Posted July 1, 2021 Posted July 1, 2021 I got back home and it had populated finally FT. 1 Quote
T_O_A_D Posted July 1, 2021 Posted July 1, 2021 I need help with the T-45 though, I thought I found the files, but I get and authorization error when starting the game and I can't activate the Module, so till then I can't actually join the Server Quote
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.