2. Administrators fruitbat Posted July 16, 2010 2. Administrators Report Share Posted July 16, 2010 bugger it. my comp is refusing to boot up, not even getting anywhere, no beeps no nothing. Still its in warrenty, and will be calling them first thing tomorrow, to pick it up and fix it, but will not be able to fly for the forseeable future bollocks. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted July 16, 2010 1. DDz Quorum Report Share Posted July 16, 2010 Ooohhwwww... that's... that's .... carp.... Good thing though its still under warranty.... bad thing is its of no use for us to try and diagnose the problem, have you attempt all kinds of things, unplug stuff, change connections, rewire, have it go BOOM! Quote Link to comment Share on other sites More sharing options...
Kimosabi Posted July 16, 2010 Report Share Posted July 16, 2010 No boot up as in no power, or BIOS screen only? Warranty and sending stuff back and forth plus waiting would suck ass if it's your PSU that's messing... Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 16, 2010 Author 2. Administrators Report Share Posted July 16, 2010 don't thinik its not the psu, when i turn it on, all the flashy lights come on, fans spin up etc, but the monitor doesn't pick up that its turned on, so i'm thinking maybe GFX card? unplugged everything, execpt monitor and keyboard, same, unpulgged absolutly everything, still the same, doesn't even beep at me? Quote Link to comment Share on other sites More sharing options...
Zooly Posted July 16, 2010 Report Share Posted July 16, 2010 when my vid card failed I'm pretty sure I got the bios beep but I may be wrong (it has happened once or twice in the past), hope you get it sorted ASAP mate. Quote Link to comment Share on other sites More sharing options...
DD_asas Posted July 16, 2010 Report Share Posted July 16, 2010 don't thinik its not the psu, when i turn it on, all the flashy lights come on, fans spin up etc, but the monitor doesn't pick up that its turned on, so i'm thinking maybe GFX card? unplugged everything, execpt monitor and keyboard, same, unpulgged absolutly everything, still the same, doesn't even beep at me? Did u chek the monitor cable? if all the lights come on when u start, maybe there's something wrong with that cable. twisted or something. I had a similar prob, but was the PC power source. Quote Link to comment Share on other sites More sharing options...
T_O_A_D Posted July 16, 2010 Report Share Posted July 16, 2010 Silly twit, I got tired of you trying to shoot me down, so I snuck in wile you was away, and turned your screen around backwards. Kidding aside, that sucks. How old of a machine is it? Is it a local retailer, or are you going to have ship it off. Before I would ship it off I'd at least blow out the dirt, and unplug and replug everything back in. It may be nothing more than a loose connection. The thermal expansion inside after time, can separate a improperly plugged component from the factory. I had new builds fail in the past, So anymore when I upgrade I keep the old one around as a server for the printer,Teamspeak, Il2 and such. I had to fallback once in the last ten years to my old machine due to a bad mobo once, on the newest machine. When it's time to renew again I just rotate them down, and give away the oldest. Used to work quite well, most folks didn't have a PC or at least anything as advanced as my oldest. But now days, I suspect due to quad cores, my old one next shuffle will be dead weight for most people interests. Well good luck and see you on me six soon. Oh here is a nice link to understanding POST BEEPS http://www.computerhope.com/beep.htm Quote Link to comment Share on other sites More sharing options...
Snacko Posted July 16, 2010 Report Share Posted July 16, 2010 Try booting from the Windows DVD? Quote Link to comment Share on other sites More sharing options...
Zooly Posted July 16, 2010 Report Share Posted July 16, 2010 Might it be the processor overheating? check your fan is running as it sounds very similar to the issue I had with constant failing and inability to actually start the computer. Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 16, 2010 Author 2. Administrators Report Share Posted July 16, 2010 tried different monitor etc, and its not even getting to the bios beeps etc All that happens when i turn it on, no matter how little is plugged in, even nothing, is that the fans all power up as normal, the lights all come on, but it just sits there. looking at the link toad linked, no beeps does indeed suggest power. the company i bought it from is these guys, and they've got a pretty good rep, http://www.pcspecialist.co.uk/ The comp is 1 and a half years old into a 2 year warrenty (glad i went for that extra year now). The warrenty is free pick up and return, so thats no hassle from my point of view, and i've made sure that i've not done anything to invalidate it, so all is good from that point of view. Will be phoning then up first thing tomorrow, now i've loacated all the paperwork. I'll be back on your six sometime, just a matter of time i guess. Quote Link to comment Share on other sites More sharing options...
T_O_A_D Posted July 16, 2010 Report Share Posted July 16, 2010 Well bud can ya at least make the machine your posting from runTS. I'm stuck here with zooly by myself Quote Link to comment Share on other sites More sharing options...
Kimosabi Posted July 16, 2010 Report Share Posted July 16, 2010 If you have a multimeter and a paperclip you can easily check the PSU yourself. The PSU have more than one kind of voltage to supply so even though you have juice supplying your fans from the molex connectors you could still have a faulty 3.3, 5 or 12V rail dedicated to your motherboard or even the SATA power connectors(drives won't start). If you feel confident about it, unhook the PSU, take it out of the case and short one black(any black) and one solid green wire on the 24pin connector, using a bent-out paperclip(or something similar), that's the power-button signal. Then you can work your way down through the connector using the multimeter and check if you have voltages between any black(they're all ground) and a colored wire. If you have one or some of them not showing 3.3, 5 or 12V, chances are that your PSU is fried. *edit* Just noticed that you're doing the Warranty-thingy lol. Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 17, 2010 Author 2. Administrators Report Share Posted July 17, 2010 well phoned them up this morning, and they were really helpful, and they're picking it up on tuesday. so i'll just have to wait after that. Might see if i can get my old machine running just to pass the time, but i can't be bothered to download UP for it. least i'll be able to abuse you all on teamspeak then, lol. Quote Link to comment Share on other sites More sharing options...
Smash Posted July 17, 2010 Report Share Posted July 17, 2010 I feel your pain fruitbat...... for quite awile now.... Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted July 17, 2010 1. DDz Quorum Report Share Posted July 17, 2010 Reset the CMOS! One of the first things to try when a system fails to post, Asus boards were good at this, apply power and sweet fanny adams. Reset CMOS by jumpering it, sometimes took 10+ minutes, then they would spring back into life. Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 17, 2010 Author 2. Administrators Report Share Posted July 17, 2010 hi rog. Looking in the motherboard manuel, in the jumpers section, i can only see Clear RTC RAM. it says this clears the CMOS memory of date time and system setup parameters. Is this the thing to do, or just take out the battery? By the way, its an asus P6T deluxe board. cheers kev Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted July 17, 2010 1. DDz Quorum Report Share Posted July 17, 2010 Yup that's the one Kev, reset that and see what occurs Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 18, 2010 Author 2. Administrators Report Share Posted July 18, 2010 muhhahahahahhahaha, Its alive Thanks rog, fired up straight away. Now that leads to a question, why did it happen in the first place. I had just installed ntune, could that be the reason? Quote Link to comment Share on other sites More sharing options...
Crash Posted July 18, 2010 Report Share Posted July 18, 2010 muhhahahahahhahaha, Its alive Thanks rog, fired up straight away. Now that leads to a question, why did it happen in the first place. I had just installed ntune, could that be the reason? Windows Feature? Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted July 18, 2010 1. DDz Quorum Report Share Posted July 18, 2010 Good Job! It will depend how much 'tuning' you've been doing with Ntune... (Is that even possible with that? Overclocking?) Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 18, 2010 Author 2. Administrators Report Share Posted July 18, 2010 i hadn't tuned anything, just started it for the very first time, after installing lol. Now for some reason, i can't get my bloody x52 profile to recognise. Once thats sorted, i'll be ready to fly again.... Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted July 18, 2010 1. DDz Quorum Report Share Posted July 18, 2010 Sometimes it does it because it can.. Could be nTune probed and took out a setting. Make sure all BIOS settings are as they should be now, X52 could be the change in USB port? Quote Link to comment Share on other sites More sharing options...
2. Administrators fruitbat Posted July 18, 2010 Author 2. Administrators Report Share Posted July 18, 2010 all is good in the world again, reinstalled driver and software for the x52, and now it picks up my profile again. Changed all the bios settings back to how they should be, kinda reluctant to try to run ntune again.... Quote Link to comment Share on other sites More sharing options...
T_O_A_D Posted July 18, 2010 Report Share Posted July 18, 2010 Nice catch Roger!!!!! Now FB had you been upfront in the first place, that you had been OCing and tweaking your settings. We all would of told you upfront to rest your CMOS. It's a lesson any OC learns sooner or later. LOL Now yo have to sheepishly tell the PC store your maneuver. It's also something nearly everybody fails to post upfront too. Quote Link to comment Share on other sites More sharing options...
Kimosabi Posted July 19, 2010 Report Share Posted July 19, 2010 Good to hear you got it sorted, Fruitbat. From one overclocker to another: DO NOT use any kind of software to tweak any voltage settings in your BIOS. It's one of the golden rules man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.