Sweper Posted November 7, 2009 Share Posted November 7, 2009 ~S~ Mates. Last evening when FT hosted a "thunder storm" mission my frame rate was almost at bottom rate. Lowest I had was 9 FPS! Today I checked the FPS playing the The Blackdeath track and compared to what I had before using Fraps. I new that something was fishy and now I saw it with my own eyes. Before: Frames: 7348 Min: 28 Max: 62 Avrage: 50,641 Now: conf.ini Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted November 7, 2009 1. DDz Quorum Share Posted November 7, 2009 Check your NVdia Control Panel settings: 'Threaded optimization' should be Off. If it's off in the Game's profile, also check the settings in the Global section, Quote Link to comment Share on other sites More sharing options...
Sweper Posted November 7, 2009 Author Share Posted November 7, 2009 Check your NVdia Control Panel settings: 'Threaded optimization' should be Off. If it's off in the Game's profile, also check the settings in the Global section, In the settings for IL-2 Forgotten Battles, it is set to "Use Global Setting (Auto)" No good? What about V-sync? Should it be OFF, Forced ON or 3D or Global? Swep Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted November 7, 2009 1. DDz Quorum Share Posted November 7, 2009 V-Sync should be on if you have Track-IR, and its use results into tearing on the screen. Set Threaded Optimization to Off in global, and re-test. Quote Link to comment Share on other sites More sharing options...
Sweper Posted November 7, 2009 Author Share Posted November 7, 2009 Nope, not any better, same low fps everytime Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted November 7, 2009 1. DDz Quorum Share Posted November 7, 2009 Nope... not right now... Besides, I gotta go out now, will be back in an hour or so, maybe then get on TS and maybe have a look at your system via Remote Assistance? Quote Link to comment Share on other sites More sharing options...
Sweper Posted November 7, 2009 Author Share Posted November 7, 2009 Nope... not right now... Besides, I gotta go out now, will be back in an hour or so, maybe then get on TS and maybe have a look at your system via Remote Assistance? Sure, why not. Thanks FT! Swep Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted November 7, 2009 1. DDz Quorum Share Posted November 7, 2009 I'm there... Quote Link to comment Share on other sites More sharing options...
T_O_A_D Posted November 7, 2009 Share Posted November 7, 2009 I'm about to go to bed, but you can get rid of several of those processes. You show 40 before you ever load your game and what ever else you use while gaming. Here is a shot of mine. From my old Machine Win XP 32 I see there are even a couple on there I can take off, knowing what I know now. Also run a dxdiag, and run all the test. Make sure the DirectX cube 3D image spins slowly, enough you can read it. If it spins fast you have a problem with Video drivers, ore DirectX itself. Off to bed. Good Luck Also try running BD with sound turned off in the game settings, You should only gain a couple of Quote Link to comment Share on other sites More sharing options...
Sweper Posted November 7, 2009 Author Share Posted November 7, 2009 ~S~ Toad. I runned dxdiag and everything worked perfect. FT helped me to get rid of some programs running in the background as well. Have runned the BT again but no difference. No sound issue either. Blast... Swep Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 7, 2009 1. DDz Quorum Share Posted November 7, 2009 I have found blackviper.com to have lots of good information on processes and which you can shut down. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum FoolTrottel Posted November 7, 2009 1. DDz Quorum Share Posted November 7, 2009 [Render_OpenGL] TexQual=3 TexMipFilter=3 TexCompress=0 TexFlags.UseDither=1 TexFlags.UseAlpha=0 TexFlags.UseIndex=0 TexFlags.PolygonStipple=0 TexFlags.UseClampedSprites=0 TexFlags.DrawLandByTriangles=0 TexFlags.UseVertexArrays=1 TexFlags.DisableAPIExtensions=0 TexFlags.ARBMultitextureExt=1 TexFlags.TexEnvCombineExt=1 TexFlags.SecondaryColorExt=1 TexFlags.VertexArrayExt=1 TexFlags.ClipHintExt=0 TexFlags.UsePaletteExt=0 TexFlags.TexAnisotropicExt=1 TexFlags.TexCompressARBExt=1 TexFlags.TexEnvCombine4NV=1 TexFlags.TexEnvCombineDot3=1 TexFlags.DepthClampNV=1 TexFlags.SeparateSpecular=1 TexFlags.TextureShaderNV=1 HardwareShaders=1 Shadows=2 Specular=2 SpecularLight=2 DiffuseLight=2 DynamicalLights=1 MeshDetail=2 VisibilityDistance=3 Sky=2 Forest=2 LandShading=3 LandDetails=2 ;LandGeom=3 LandGeom=2 TexLarge=1 TexLandQual=3 TexLandLarge=1 VideoSetupId=17 Water=2 Effects=1 ForceShaders1x=0 PolygonOffsetFactor=-0.15 PolygonOffsetUnits=-3.0 Quote Link to comment Share on other sites More sharing options...
Sweper Posted November 8, 2009 Author Share Posted November 8, 2009 I have found blackviper.com to have lots of good information on processes and which you can shut down. Thanks Friar, will check this one. I´ve used a program that checked how componets are performing and searched for bottlenecks in pc but I sent it to the trash bin yesterday since it was a shareware and it had expired. Is there another program to download somewhere that checks cpu ram and grafic performance? I´ve read about a program but can´t remember its name. Neither the name of the program i deleted yesterday Quote Link to comment Share on other sites More sharing options...
2. Administrators Jabo Posted November 8, 2009 2. Administrators Share Posted November 8, 2009 V-Sync should be on if you have Track-IR Really? I run TIR with v-sync forced off via the nvidia control panel without problems... Jabo Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Sid Posted November 9, 2009 1. DDz Quorum Share Posted November 9, 2009 If you aren't getting screen-tearing when you turn your head then it's not necessary to have it on - I always get the tearing so keep it on. Quote Link to comment Share on other sites More sharing options...
2. Administrators Jabo Posted November 9, 2009 2. Administrators Share Posted November 9, 2009 No, no screen tears at all. Quote Link to comment Share on other sites More sharing options...
Sweper Posted December 21, 2009 Author Share Posted December 21, 2009 Salute! Sorry for a late answer. I dont know what happend, maybe a partial break down of my grafic card. Anyway, I bought the latest Asus GTS250 512mb "Dark Knight" since I could not find a solution to get as steady fps as I used to have. Now IL-2 works like a charm. My first measurment was made in may (when I had no trouble with occasional low fps) and BlackDeath showed: 7348 Frames, 28 min, 62 max and 50.641 avrage fps. With new grafics I get: 7911, 28, 62 and 55.081. No bigger change compared to from the time it worked quiet well, but a big difference to what I got when it did not worked that well. I let the grafics run on default settings and the sceenery look so good. Also I see no fps drop in any wheather conditions, lots of trees, clouds, water, beaches whatsoever. Only when over large citys. My config file I set water to 3, forest to 3 and something else I forgot. Me happy now! Swep Quote Link to comment Share on other sites More sharing options...
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.