delta7

Teamspeak address:

apologies

excellent

just found my next project pips priller A6 http://www.hannants.co.uk/search/?FULL=EDK8171

this is a good idea but the only problem is I dont think you will shoot down any planes with invincibility on - IMHO its better trying something like the tig where the target puts his smoke on and 2 or 3 attack him

see here- excellent !!!!!!!! http://www.simhq.com/_air10/air_307a.html

you are not alone mate -

PHEW - its been saved - used toothpaste to remove glue from canopy then klear floor polish to shine it up and looks fine now http://www.ipmsstockholm.org/magazine/2 ... nopies.htm klear also makes a good varnish to protect the model and so Iv coated it with this and started the decals- they take very nicely on top of this finish the cockpit that fell of fhas been trimmed and fitted with the help of bluetac - this took around 3 hours of work to get it to sit right im working on the decals now and then some weathering - Im going to use a spounge and silver paint for this - Iv seen pictures of this and it works nice, Ill emphasise the panel lines with pencil and then put the final varnish on and that should be it.- probably take around 2 weeks due to work etc

someone

ah apologies - my bad

you can run chdsk from the boot floppy - check you r e-mails I have sent you a boot disc and included chkdsk

http://www.bootdisk.com/ is one answer - but easier if you can get a hold of any copy of xp and try a repair http://michaelstevenstech.com/XPrepairinstall.htm read this all CAREFULLY - there are various options

congratulations flatspinman - she will take over for a while but treasure every moment.

well the 109 has a strong chance of ending in the bucket I

happy birthday mate

according to what I have read he did have one but didnt fly it much , he preferred his last G10 which he said was the fastest 109 he had flown

wip pictures from my 109

to see what processor you have start-settings-control panel -system-hardware-devicemanager click + on processor then right

you take care mate- a friend a work got one - bit of mid life crisis thing - brand new - took it out with his friend - friend ran into him- he was in hospital for 4 months with a broken leg and the machine was a write off . similar thing happened to another coleague - he bought a motorbike - 6 months later a car sideswiped him and he has been in and out of hospital for a year. Id love to get a motor bike again but that just put me off Oh and happy holidays

is it not still under warrenty mate ? - if so get in touch with supplier asap and dont muck around too much or they might get tetchy

thanks for reinforcing what I thought guys -nice diagram chris

http://www.maplin.co.uk/module.aspx?Mod ... 1&doy=26m6 will solve your connection problems you should try to put the graphics card on its own power rail and use the splitter to allow you to connect other users the power supply will output x volts (12 I think) and the extra power is just to supply more demand so I think he is talking sh1te but Im not sure so wait until someone who knows electrics replies mate

I watched this on the plane back from america - excellent film -but only if you dont mind subtitles as its filmed in japanese

WOW thats a nice card and you wont have to worry about cleaning out your drivers- just check your power supply is