delta7

http://forums.ubi.com/eve/forums/a/tpc/ ... 6101046026

http://www.mission4today.com/index.php? ... atch&id=27

from your post you can see that the video card is not detected- Display Tab 1: The system is using the generic video driver. Please install video driver provided by the hardware manufacturer. Direct3D functionality not available. You should verify that the driver is a final version from the hardware manufacturer. Sound Tab 1: No sound card was found. If one is expected, you should install a sound driver provided by the hardware manufacturer. --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Current Mode: 1024 x 768 (32 bit) (1Hz) Monitor: Monitor Max Res: Driver Name: vga.dll Driver Version: 5.01.2600.0000 (English) DDI Version: unknown Driver Attributes: Final Retail Driver Date/Size: 8/23/2001 07:00:00, 9344 bytes WHQL Logo'd: Yes WHQL Date Stamp: n/a VDD: n/a Mini VDD: vga.sys Mini VDD Date: 8/3/2004 16:07:08, 20992 bytes Device Identifier: {D7B70EE0-4340-11CF-B063-282AAEC2C835} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Revision ID: 0x0000 Video Accel: Deinterlace Caps: n/a Registry: OK DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available DDraw Test Result: Not run D3D7 Test Result: Not run D3D8 Test Result: Not run D3D9 Test Result: Not run you say you have installed the motherboard chipset drivers- can you check that the agp is enabled in bios and it isnt just looking for some other on board device- I think you said it was dual pci and agp so make sure correct source is enabled - do the same with the sound card make sure it isnt looking for on board sound. as others have suggested take it out and clean the connections and reseat the card then check and double check all the power supplies on the board and especially the power supply to the card good luck

I use il2sticks with x-45 running and havnt had any problems so far - well done to both for figuring it out

http://www.il2-fullmissionbuilder.com/index.html

COLD GAMBLER - bloke has suggested most of my favourites like sound and effects etc but here are some additional suggestions I have been tweaking the video options in the game and this is what is best for me on an ati 850 agp visability distance - medium

Thanks mate but iv done this but mine still reboots

usually in xp if you get the blue screen the machine will reboot automatically and you wont have time to read the error, however the message is written to a file and you can read this with a free microsoft tool - anyway this article tells you how http://forums.majorgeeks.com/showthread.php?t=35246 you can then use the information to identify the problem and try to fix it

happy birthday mate S

One thing that we could improve is out takeoff and landings. there are very often restarts or scrapping takeoffs for airstarts in our co-ops and this leads to a lack of practice. It can also cause problems with host or others machines with continual restarts. Now I know that Im probably setting myself up for a big fall but I think I do ok here and so Ill put up a checklist and some hints and I hope this helps others- most of this will be well known but hopefully it will help some. hopefully some of our JO chaps can have a look over this and give it the benifit of their experience and training as they do a bit of this there remember that if you crash on takeoff then you could be sitting there for 30mins or more waiting for others to finish. stay calm - let the game settle - spawns and takeoff put a load on any machine so take everything carefully. 1) know where you are in line. In normal co-ops switch to external view and look. In closed pit then start your engine, put full left rudder and SLOWLY throttle up- JUST enough to swing the nose so you can see the runway in front.then throttle off and brake to sit in line dont roll forward and stop as AI or your mates will think your taking off and plough into the back of you 2) NORMAL AIRFIELDS when runway is clear then put full right rudder and swing nose slowly until lined up with centre of runway lock tailwheel put flaps to takeoff most planes and especially spitfires will dip their nose on takeoff so put in a little uptrim if you use manual prop pitch make sure it is at 100% throttle up smoothly ( if you slam the throttle forward you will swing more) the planes nose

http://cgi.ebay.co.uk/Fighter-Combat-Ro ... dZViewItem go on you have been a good boy and deserve a nice xmas pressie - a bit dry but the bible on air warfare

http://www.simhq.com/_air10/air_312a.html excellent !!!!!!!!!!

http://www.war-clouds.com/modules.php?n ... sc&start=0

http://edimensional.com/product_info.ph ... cts_id=135 :o :o

I have posted my profiles here- http://www.dangerdogz.com/k9vault/Downl ... rprofiles/ I use charvels profile modded to damp it down, there are also another 2 he sent me one a modded one and one he wrote for 6dof - works for BOB2 WOV - but is ok for use with il2 feel free to try them out- the ones in the backup folder are untouched by me the ones in the main folder may have been tweaked make a copy of your existing profile folder if you want to use mine as yours will get overwritten.

anything with a spam button built in is priceless as is this review excellent mate - just about covered the screen in coffee

these are both usb devices that you are getting problems with you have a via chipset so make sure you are running the latest drivers e.g. http://www.viaarena.com/default.aspx?Pa ... bCatID=122 for usb on windows xp. check with your motherboard manufacturers website or via arena for correct updates for your board also if possible get a usb card that fits into a pci slot on the motherboard and ditch the hub

have a read at this http://mission4today.com/index.php?name ... ow&kid=384 and try his profile - I think its the best around s

tir likes to be connested directly to the pc and not on a usb

I have updated my planner for x-45 and improved it and added all key presses so if anyone is interested then its here http://www.dangerdogz.com/k9vault/Downl ... -45layout/

Happy birthday mate- hope you have a good one

happy birthday - just 1 more to get a 69

Bet no-one has guessed by my accent but Im.........Scottish

found this - might be of use to some http://il2.netteq.com/Muliti-Core_Guide.aspx its a guide to set up il2 to run on 1 core and all other apps to run on the other