Stingray Posted August 15, 2008 Report Share Posted August 15, 2008 Yo, I picked up an X-52 pro a few weeks ago, it has been working great. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted August 15, 2008 1. DDz Quorum Report Share Posted August 15, 2008 have you checked the set up in case a dead zone has got set by accident? control panel/game devices/x52/properties (just in case you did'nt know, please excuse if you did!) Friar Quote Link to comment Share on other sites More sharing options...
Klinger Posted August 15, 2008 Report Share Posted August 15, 2008 As Friar said with the control panel. Also try unplugging the X52 at the USB. Plug it in, and it'll almost certainly have recalibrated itself. Works for me. Quote Link to comment Share on other sites More sharing options...
Snacko Posted August 15, 2008 Report Share Posted August 15, 2008 It sound to me like the game may have your throttle settings low. Quote Link to comment Share on other sites More sharing options...
Stingray Posted August 15, 2008 Author Report Share Posted August 15, 2008 thanks for the replies, I'll check all these things when I get home today. Snacko, I'll check out the IL-2 Joycontrol program, but I am curious what are the advantages of using it over the Saitek SST software? Quote Link to comment Share on other sites More sharing options...
Snacko Posted August 15, 2008 Report Share Posted August 15, 2008 It lets you tweak each axis just for IL2. Quote Link to comment Share on other sites More sharing options...
Stingray Posted August 15, 2008 Author Report Share Posted August 15, 2008 Yo, yep, unplugging/plugging it in worked Quote Link to comment Share on other sites More sharing options...
T_O_A_D Posted August 16, 2008 Report Share Posted August 16, 2008 I calibrate my X-45 and it should work on the x-52, by only moving the throttle about 80% of its actual movement. This forces the software to be more responsive, and no matter what, it will read 110% in game since I can move the pots past the calibration point. Quote Link to comment Share on other sites More sharing options...
Snacko Posted August 16, 2008 Report Share Posted August 16, 2008 Stingray, even if you have your problem solved, look into that IL2 Joy Control program. Quote Link to comment Share on other sites More sharing options...
Vaca Posted September 3, 2008 Report Share Posted September 3, 2008 Stingray, I have had the same problem and the resolution is to delete a couple of reg keys (don't know them by heart), unplug the controler, replug the controller, move it on all axis (trothle, rotaries, slider, buttons) and then it should be resolved and work as before. If you still have this problem let me know and I'll get you the registry keys which you need to delete. ~S~ Vaca Quote Link to comment Share on other sites More sharing options...
Stingray Posted September 3, 2008 Author Report Share Posted September 3, 2008 Hi Vaca, The solution for me was to simply unplug the joystick while the computer was on, and this caused the auto-calibration routine to start and it fixed everything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.