delta7 Posted July 2, 2019 Posted July 2, 2019 Is there a new control scheme for 2 engine planes, bit confused, used to fly pe2 but now it wont take prop pitch rpm or mix input so although I can start engines I cant take off without getting full rpm, other single engine planes take input, do I need to map rpm and pitch to engine 1 and engine 2 seperatly now ta Quote
Crash Posted July 2, 2019 Posted July 2, 2019 I am sure that there is a select all engines or toggle all engines button/keypress Quote
2. Administrators Jabo Posted July 31, 2019 2. Administrators Posted July 31, 2019 This was causing problems for me too Delta (at least until Sid kindly straightened out my control settings). Now I have a dedicated button to start each engine and then separate sliders for throttle and pitch on each engine. I also have buttons mapped so I can select a specific engine for feathering/fire suppression/etc as necessary. If it would help I'd be happy to hop on TS to go through it with you? Quote
delta7 Posted July 31, 2019 Author Posted July 31, 2019 Sorry should have said I have found the solution, I hadn't mix properly mapped so was unable to increase it for take off so basically it was me being an idiot and didn't RTFM. ? Quote
Crash Posted August 13, 2019 Posted August 13, 2019 I didnt know this about Pe-2 It might catch you out https://forum.il2sturmovik.com/topic/45342-non-responding-rpm-keybindings/ Quote
ns.png.271e220a6d546f1f4c2caeb85e919e2e.png)
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.