FoolTrottel

You're welcome Jack! Oh, to add: Upgrade W7 64bit Pro to W10 64 bit Pro!

Decided to upgrade my secondary pc (used for TS , 1946 hosting tools and test environment for CloD server) today... Works nicely. Happy with the Upgrade, as all applications and settings get saved / transferred. Another plus of this, is that it does not ask to register/logon with a microsoft account, so it won't automatically put all your documents and settings in OneDrive (Ms's cloud) Some issues found, yet all rather typical for my system me thinks: A. It did not recognize my Sennheiser USB headset. Cause was the fact it was connected via a non powered USB Hub... Connecting it to the mobo directly fixed it, it recognized it and installed its drivers. Reconnected it to the hub and it still works. B. The CloD server - Atag ClodWatchdog combo did not start, the Watchdog found a generic error, and could not connect. Not sure what the fix was, but it was either switching off the UAC (which I planned on doing anyways) or running the 'Launcher' once 'As Administrator' ... or maybe just letting them things get used to one and other... C. Had one other 'Unknown Device', via its details I found out I needed a W10 driver for the AsRock Q1900M Motherboard, the Intel Sideband Fabric Device Driver. (wot?) 1946 works, TS works etc. So, let's see what happens next ....

They say Lenovo also delivers good stuff... but that's what I've heard! Processor: i5 8Gb internal memory. About the HD storage: Make sure there's an SSD in there... 256 GB - not the traditional /HD. (You may need 500Gb if you are doing lots of photo and/or video stuff, for normal work, 256 will do... me thinks)

Thank you!

Nicely done by her ... To have a book published at age 18 ! Brilliant!

Oy, us been to 'Endon already yeah... ya know... like ...

Here's a video of the show I missed there: (includes the mustang at 26:00 approx.)

Hey, that looks to have been recorded at Teuge airfield... quite close to here!

Right click taskbar, select task manager... Or press Start, Run, type taskmgr

Check the status/properties of the first document (top one) in the printer queue. Try and delete it... maybe it's got some issue, and once it's gone, it may print the others.... What's the status of the print queue?

So, because so many models are not ón the bridge currently, decided to build a cabinet for them. Too bad, all of them still do not fit in it...

P12-B!

P12-A?

yea, I miss you too mate. At least you visit us to say hello. I meant Pooka, have not seen him for a long time. Whatsup? Pooka's also busy, I've heard ...

Ah, so that's why it looked 'familiar'....

Probably will Arthur, though possibly not as 'interesting' as the guy in the video ... I do not own a gun!

Yes on the holidays, (well, as of this Saturday), No on the Legends comin' ... Well, I said i'd keep badgering you until the day comes You did, and you do!

Weirdness? Wot? Waves? The only setting changed in conf.ini to get this is Landgeom. First picture it's set to three, second to two. The distance to the mountain is just over 36km, that's why we do not see it when Landgeom=2 ... Yes on the holidays, (well, as of this Saturday), No on the Legends comin' ...

This is with stock 4.13m, viewed from the Full Mission Builder. On this one, you can see the highest mountain is still visible, ie above waterlevel, so not flooded. (Yes, look closely, just above the blue arrow) Whereas, on this one, the waterlevels are much higher, as now the highest mountain is not visible, so it must be completely flooded! Both recorded from a distance of just over 36 km from the mountain. Now that's the difference between WaterLevel=2 and WaterLevel=3 Never knew it worked this way... Hm, should maybe test this on a desert map as well, I bet all that sand will soke up much more water than all those rocks on the Slovaniaka map... so should maybe try WaterLevel=4. Then again, the mountains on the desert map are not thát high ... Anyone?

Should is the key here, solving it not so...

Oh, yeah, there are issues with IE 11 and this website. Dunno how to fix yet, but I'll keep pondering. It's not you, you are not being blocked ... it's just the browser...

Hm, should work.... lol Weird stuff!

Sure, will try! What browser are you using?