Jump to content
NEW DISCORD SERVER DETAILS - SIGN UP NOW - Dogz Members Only Private Thread ×

Kimosabi

3. Danger Dogz
  • Posts

    851
  • Joined

  • Last visited

  • Days Won

    1
  • Country

    Norway

Everything posted by Kimosabi

  1. I have a 5870, Snacko. Will be looking into those links! Toad, appreciate it, I'll try it out tomorrow, just swap and see what happens(without deleting the old one ofcourse). Thanks guys!
  2. I don't envy US citizens and the country's economy right now man. Won't go for the RIB either, took another peek to make sure I got everything and found some more faults the company didn't tell me about. :)

  3. Yeah, usually I tug some wires etc. as an initial test as well but this wire didn't touch ground all the time. Different engine vibrations made it touch ground on occation only. Mostly lower rpms and high load, like when I was turning around just above planing speed there.

  4. I had never driven that boat before so after I was done shooting, I could start experimenting with lift/trim. In the video the prop was way too low and trim was way too high, which makes light V-hulled, and tail heavy boats jump around a bit. I found the sweet spot later on though, 60+ knots.

  5. Congrats man. 4 years!
  6. Don't know if there's any config settings different from 4.09 etc. I'll look it up over at the banana forum.
  7. Yah, I thought I had the settings back to stock but I still get some weird layer flickering on some maps. Dino's German airbase yesterday flickered between wet with ships in it to runway depending on angle I was looking at it and I don't recall having that problem before. Very possible that I may have forgotten some setting in the config.ini. Anyone have a stock config setup to share?
  8. Great vid. Man, two Hornets joining up with three Bearcats, doesn't get much better than that.
  9. About the stick "sagging". Mine does sag insignificantly forward so wether your plane is going up or down/left or right when releasing it, greatly depends on what type of aircraft I'm flying, speed, pitch, throttle etc. I have reduced the sensitivity on it though(0-5-10-20 etc.) so that setting will allow a couple of millimeters off centre when I release it. I had to do that because flying an agile plane, wings level, like the FW190 or P-51 was basically impossible. That centering function you have there sounds interesting......
  10. Heyah Mikko! Yeah it was weird how the sliders started messing about. One day I could have prop pitch on R1 and flaps on R2 and the next day it could be opposite or flaps working simoultaneously with pitch on R1. Never made any changes in the meantime and all assignments were disabled in the game. Since it's the first time you've heard about it, I can imagine that it could have been some kind of stuff going on with the G940 program/profiler though. I've deleted that program now, as well as Multithrottle and now my assignments stays where they are supposed to be. Only downside is that I can't adjust spring tension anymore. I do suspect that there was some kind of interruption between them though because even after I stopped using your program, the throttle lights went AWOL to never come back again. Even tried re-installing the drivers to see if they would come back. Well, doesn't matter really because the lights were just green all the time anyway. The buttons work fine. I do appreciate your effort and dedication to try working out a neat program for us IL-2 pilots. I know alof of IL-2 dudes are hooked on it, Urufu_Shinjiro at UbiZoo even stated that it is a must for G940 owners, so there you go. I have settled down with using keys for trims again though, I like to hold the stick low when flying level and straight so me involuntary adjusting the trims with my wrist was another issue. The trim-wheels would be better off placed on the side of the base IMO. If you want, I'm sure that the Dogz would be happy to have you dropping in and fly with us sometime, Mikko. Just say the word m8!
  11. squat. I'm currently looking at buying a 28' RIB with 2x250 E-Tecs. It's from an insurance company which had it recovered from a theft so it's very cheap. I could make profit off that boat by just selling the motors alone. The thieves did some minor damage to it though so I have to crunch some numbers before I go for it.

  12. emission laws. Here's me testrunning a 21' Zyklon with a 200XS: http://www.youtube.com/watch?v=s10RsOuPPSA

    I managed to finally provoke the symptom at the end of the vid, sounds sinilar to a rpm limiter. The reason for it was a scuffed MAP-sensor lead, made the ECM a bit confused. And let me tell ya, that was NOT an easy fault to find lol. The diagnose program didn't find...

  13. Yep, apparently Mercury did alot of changes during those years. You CAN get a 2.4 to 200hp as well though but from what I've heard the 2.5XR6 has different(larger) porting so there you go I guess. We don't see alot of those older models anymore, Optimax, Fourstrokes and Verado's seems to have taken over. Besides Optimax, we're not allowed to sell regular two-strokes anymore. New...

  14. There was one guy that knew how to handle it though. Very nifty how he used his whole body to absorb the recoil and "pivoted" slightly backwards after firing.
  15. Lucky you guys made it all the way flying with that bent wing. Someone needs to take a look at that. Smokin' hot sandwich Lady! Nice pics Swep.
  16. Try HERE. If your computer blows up, Fruitbat is responsible. *EDIT*
  17. http://www.youtube.com/watch?v=6FI_HVLRu_E
  18. Kimosabi

    Screenshots of new smoke effects.

    SCREENSHOTS OF VARIOUS NATURE!!! Yoohoooo!
  19. From the album: Screenshots of new smoke effects.

    It has smoke and flames in it.

    © © DangerDogz.com

  20. I assumed that you suggested we should use the gallery to show screenshots instead of this thread. Anyway, added to the gallery as well. Point taken. Why didn't you say so?
  21. Did you extract it directly to the "jsgmemods"-folder? Worked great for me. Just enabled it through jsgme and there it was. I do not have any Uranium-mods in my jsgme though. Maybe that's the difference.
  22. No screenshots allowed in the screenshots thread?
×
×
  • Create New...