Birdy Posted October 24, 2007 Share Posted October 24, 2007 ~S~ All can any techi types help with my slow ass computer. I have 2.4 ghz pentium 4 Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 ~S~ All can any techi types help with my slow ass computer. I have 2.4 ghz pentium 4 task manager filel.doc Birdy's pc specs.doc Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 B16Enk and Bbloke are probably the best guys to help you Birdy and they should be along shortly. You might want to post your dxdiag here. There could be any number of reasons why you are not getting the best performance. 1 gig of ram should be lots so its likely something else like old chipset drivers. 100% CPU usage is quite normal. Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 B16Enk and Bbloke are probably the best guys to help you Birdy and they should be along shortly. You might want to post your dxdiag here. There could be any number of reasons why you are not getting the best performance. 1 gig of ram should be lots so its likely something else like old chipset drivers. 100% CPU usage is quite normal. Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 dxdiag ? sorry whats this and wfhat do i need to do to it? forget that found how to get dxdiag and here it is Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 dxdiag ? sorry whats this and wfhat do i need to do to it? forget that found how to get dxdiag and here it is DxDiag.txt Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 Go to start/run and then type in dxdiag A report like the attached will be run. Go down to the bottom of the page and click on Save All Infromation. Save it to desktop or my docs and then copy and paste it here. Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 Go to start/run and then type in dxdiag A report like the attached will be run. Go down to the bottom of the page and click on Save All Infromation. Save it to desktop or my docs and then copy and paste it here. Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 ~S~ Sir I have attached it to above file, sorry about that. Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 ~S~ Sir I have attached it to above file, sorry about that. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted October 24, 2007 1. DDz Quorum Share Posted October 24, 2007 100% cpu is normal when running IL2 - it's that intensive. I'll look at your dxdiag when I get a chance, big interview tomorrow with Reuters so studying right now. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted October 24, 2007 1. DDz Quorum Share Posted October 24, 2007 100% cpu is normal when running IL2 - it's that intensive. I'll look at your dxdiag when I get a chance, big interview tomorrow with Reuters so studying right now. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted October 24, 2007 1. DDz Quorum Share Posted October 24, 2007 OK. 1. Upgrade your via drivers, go to: http://www.viaarena.com/Driver/via_hype ... _v513a.zip 2. Change sound hardware acceleration to 'Standard' use the Dxdiag tool audio tab to do that. 3. Repost Dxdiag when done (copy and paste contents into post it's easier for us to read). Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted October 24, 2007 1. DDz Quorum Share Posted October 24, 2007 OK. 1. Upgrade your via drivers, go to: http://www.viaarena.com/Driver/via_hype ... _v513a.zip 2. Change sound hardware acceleration to 'Standard' use the Dxdiag tool audio tab to do that. 3. Repost Dxdiag when done (copy and paste contents into post it's easier for us to read). Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 NP Birdy. The lads can now get their teeth into it when they finally show up. I see you are using on board sound and have hardware acceleration running at full. Should be no higher than standard and might even be better at basic. You can adjust it by running dxdiag again and then click on sound. There is a slider there which you can move to lower acceleration. Better still, you might want to get a sound card and disable on board sound in the bios. I think you could get a good card for less than 50 quid. Some of the uk wallahs could advise you best on that. Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 NP Birdy. The lads can now get their teeth into it when they finally show up. I see you are using on board sound and have hardware acceleration running at full. Should be no higher than standard and might even be better at basic. You can adjust it by running dxdiag again and then click on sound. There is a slider there which you can move to lower acceleration. Better still, you might want to get a sound card and disable on board sound in the bios. I think you could get a good card for less than 50 quid. Some of the uk wallahs could advise you best on that. Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 I have adjusted sound as advised here is my new dxdiag but havent sorted via zip, I have downloaded it but don't know where to unzip it to? Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 I have adjusted sound as advised here is my new dxdiag but havent sorted via zip, I have downloaded it but don't know where to unzip it to? DxDiag.txt Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 I think you can just unzip it to desktop and from there you can run it. Of Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted October 24, 2007 Share Posted October 24, 2007 I think you can just unzip it to desktop and from there you can run it. Of Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 please don't say that now you realy got me worried and wont touch it until someone saysa what to do? Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 please don't say that now you realy got me worried and wont touch it until someone saysa what to do? Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted October 24, 2007 1. DDz Quorum Share Posted October 24, 2007 As BG says, unzip it to a folder of your choice. Remember where and then browse to it and run the setup there. Reboot when requested and your drivers will should be up to date. VIA drivers do have the occasional blip though, which is why I asked you to repost your dxdiag when you have done the driver update. If it comes to it I am available on the 'phone if required. Jabo for instance spent some time on the 'phone with me today trying to sort out his hosting issue again. I too am UK Birdy - Cambridge to be precise. And I have an 0845 number which is the UK Dangerdogz help line LOL Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted October 24, 2007 1. DDz Quorum Share Posted October 24, 2007 As BG says, unzip it to a folder of your choice. Remember where and then browse to it and run the setup there. Reboot when requested and your drivers will should be up to date. VIA drivers do have the occasional blip though, which is why I asked you to repost your dxdiag when you have done the driver update. If it comes to it I am available on the 'phone if required. Jabo for instance spent some time on the 'phone with me today trying to sort out his hosting issue again. I too am UK Birdy - Cambridge to be precise. And I have an 0845 number which is the UK Dangerdogz help line LOL Quote Link to comment Share on other sites More sharing options...
Birdy Posted October 24, 2007 Author Share Posted October 24, 2007 I did it know ...lol Ran via and reduced sound to basic and here is my new dxdiag file. sorry cant seem to get it to paste as you guys do it. Quote Link to comment Share on other sites More sharing options...
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.