BBloke

Oh no reinforcements!!!!

You have some kinda balls using such language in this forum Turner Browns' the name!!!! LMAO http://www.dangerdogz.com/index.php?cat ... ticleid=10

Ooooooooo.. a new calendar app... sounds fun.. can I join in... I'm eager!! (posting inbetween roster tweaks!! )

LMAO.. for a non-drinker that is soo funny!

Why doesn't Barbie get pregnant? Because Ken comes in a different box.

Absolutely sweet!!! :D:D:D

Jeez guys.. its just a flag.. they all burn the same ya know!! LOL

LMAO.. nice one Rog... In the styly of Vic and Bob.. You Wouldn't let it lie. would you?! :D:D.. cool. I'll pull my post to stop em going to my page.

LOL.. I thought it was earlier too Dazza...

If you want to see what happens with on the roster page then visit here: Danger Dogs Hell Hounds This is just one page which dynamically represent the actual live roster list for both the squads. You can click on the headings to change the sort order if you wish.

Thanks guys. It was very entertaining and very enjoyable. Now that we have the SQL to generate the list I can start working on the PHP page so you can all see it. In fact.. thats done too. Hehehhehehe.. its all good fun

Beautiful... I was thinking more the A10 is surprisingly small. A plane I love.

My X45 settings: [rts_joystick] X=0 1 4 9 16 25 36 49 64 81 100 0 Y=0 1 4 9 16 25 36 49 64 81 100 0 Z=0 10 20 30 40 50 60 70 80 90 100 RZ=0 10 20 30 40 50 60 70 80 90 100 0 FF=0 U=0 10 20 30 40 50 60 70 80 90 100 0 V=0 10 20 30 40 50 60 70 80 90 100 0 1X=0 25 27 32 38 45 54 65 76 87 100 0 1Y=0 25 27 32 38 45 54 65 76 87 100 0 1RX=0 100 100 100 100 100 100 100 100 100 100 0 1RZ=0 1 4 7 11 18 27 38 48 70 100 0 1U=0 100 100 100 100 100 100 100 100 100 100 0 1V=0 100 100 100 100 100 100 100 100 100 100 0 1X1=0 25 27 32 38 45 54 65 76 87 100 0 1Y1=0 25 27 32 38 45 54 65 76 87 100 0 1RX1=0 100 100 100 100 100 100 100 100 100 100 0 1RZ1=0 1 4 7 11 18 27 38 48 70 100 0 1U1=0 100 100 100 100 100 100 100 100 100 100 0 1V1=0 100 100 100 100 100 100 100 100 100 100 0 I have an MSFFB which started higher on the scale. 45 I think. Had to do something to fight the feedback. I've had major trouble with the MSFFB and Evo Force sticks which have prevented me using them. Elevator authority seemed way off and I ended up stalling out at the peak of loops etc. Wing dips in turns seemed to be far more aggresive too. I would love to use the sticks again but I'd loose too many buttons close at hand.

I'm up close and personal at 200/200. Its the 'Jaws' effect. It goes quiet whilst I close in then bullets start flying past yer pit. I never said I was accurate!!!! I prefer to see more of the target that go for the long shot. I used to have em at 150 until they change the verocity of the explosions.

LOL @ Arsenal.. yeah but just think. When it gets better it'll "blow" then it'll be a win win situation!!

Oh ek Rog... he's learnt a few things.. Not going to be as easy to play with now Rog!!

LMAO.. makes my plastic pleasure of a girlfriend almost irrestible!! LMAO.. pass me a BIG bucket

Its funny that. I could have sworn it was on the forum and not via email.. although I didnt pay too much attention and turned up on backup TS. I just wish I had recorded it too. It was an excellent sortie from start to finish great skills and communication.

kin el

Thats a sweet looking skin. The spit in all its glory never ceases to impress me.

Well after a nice night flying and checking MBM and ATITools.. the graphics card never hit abot approx 42 ish (cant really tell as its a graph and the CPU peaked at 56 with a nice low hummmmmmmm! I'll give the graphics a bit more testing as its late and I have the back door and the conservatory door open and its blowing a nice refreshing breeze. When the winter comes and the room temp goes up I swear I'll be playing with gloves on with the doors open to keep this thing cool

LOL.. yeah couldn't believe the stupid thing!!! LOL I know its hot but at least its consistent. I know the chip was cooler in the other house but then the house was cooler too. I've read the Northwood weren't too bad with heat.. at least they have a an advantage over the Prescotts!!

Hang on a mo.. I know the numbers say it all but how is Glasgow <50 Mi from London LMAO.. Even the geographically challenged like me knows its no where near!!!! And somebody told me Sheerness isn't in Scotland.. Man I larrrrfffffffeeeeddddddd

Hi All, Well I've had an interesting day fitting new parts to my PC and as always its been fun and frustrating. I received an Arctic 5 Cooler for my X850 Pro card and a Zalman CNPS9500 LED. Both were well presented in their lovely boxes. Zalman quickly took the lead and got opened first. The VGA cooler could wait. I got the nice instructions and thanked god I wasn't using a 775 board.. man I would have cried... board out and everything. The Jet4 Coolermaster HSF was already cleaned and on the floor. It's served it purpose well but it was just too loud. The side arm brackets of the Zalman were in place. The retaining clip was seated.. ah.. oops the wrong way.... change that over in just a sec... ah no.. maybe just a minute.. or 6. Man thats fiddle to slip through the heatpipes. Phew. All's going well still. Arctic silver is smeared on the chip. The retaining clips bolts are nicely seated into the holes and down it goes for seating. Man this is TOO easy but wait I spoke way too soon. I used the very handy extra long alan key (L-Wrench!) and slowly and methodically tried to aim the bolt into the central hole of the side arm at the middle point of the motherboard... easy does it... bugga... bit left.. bit right.. up and bingo.. nip it down just a few threads.... Yeah! Now for the other.. done one the other should be a doddle.. The other.. where's it gone.. oh hell. Any small amount of pressure on one side of the clip levers the other side up far enough to stick it under the blessed and beautiful 'flowers'.. Damn!!! Ah.. I'll unscrew the otherside slightly to give me a little headroom...... nope.... blast! That was only one of the worries.. the other was the close but acceptable fit of the PSU.. It had to go... unscrewed that and try to ply it from it resting place.. it moved but not far enough... top exhaust fan was in the way.. that had to go... 15 mins later and more space to play with I tried again. Trying to get a small bolt in a small hole whilst a clip is trying its life out to stop you ain't no fun. I tried.. and tried.. and screamed.. almost had the cat flying. I was on the brink of getting something to aid me in lifting the sidearms up to make my life a little easy when voila it took hold... for a millisecond then slipped off... *~8#=#8~*.. tried again.. same result.. third time.. charm me.. pullleeeeeeseeeeeee.... hurray and alle's ohah is hanging out! IT's in and its going down... success and I thought I was lucky. After this the graphics card is going to be a blast..... ......WRONG!!! To begin with couldn't even get the darn fan lead off the board.. had to bust the side of the clip before it gave it up.... I wasnt happy.. the 9800xt was a piece of cake. At least it came of without damaging anything, which was a concern. The HSF was off the chip was cleaned and prepped for the new one.. the memory chip pads were ready to do their job. Both pieces fitted perfectly.. hey.. this one is easy. I followed the very easy instructions.. then checked around the unit to make sure everything was where it should be and Noooooooooooooo!!!!!! One of the RAM chips wasnt touching.. oh *~#~(*... reset the screws and gave a little pressure and another successful fitting. Great.. Look at this beast.. it's now 1/3rd longer than the standard, twice as bulky and how in gods name am I suppose to get the molex plug down there!!! Do I have small fingers!?!!? Well I managed it. Threw everything back together and fired it up. Wow.. quiet.. I can hear the soft umm of fans instead of the torture of knackered turbine!!! Hurray!! I dont have to deafen the neighbours. All in all its been an easy enough experience setting the hiccups aside. Which after all would have been far less had the board been on the table and not inside my mini coffin and excuse for a home heating system. The Zalman was for the reason above. Noise. As well as the fact that my CPU is running far higher speeds than Intel want. (2.4Ghz at 3.38Ghz) The Arctic Cooler I purchased as a means to try an open my card up a little further than it should too. I recently flashed my X850 Pro to an X850 XT PE but restricted the speeds to XT. Now I have a better HSF for it I'm going to see how far it will go. So far the CPU Temps have gone down a bit on idle. 53 from 55. During ATITool's 3d View 55 instead of 56. No great shakes.. the noise level is worth it for no change in temps. The graphics card now idles at 34 instead of 37. During ATITools 3d view it peaked at 55. IL2 or Simpson hit and run would get it up to 60 before. I'm waiting for the inevitable in the shortterm. Its ok installing new bits and gadgets but I dont like smelling the newness burn away.. It leaves me thinking there something else on its way out!!!! Thats it for my dribble. I'll maybe post some pictures and these arent pretty but it depends on how bad the show my wiring to be!!!!! mmmmmm must get round to that one day.

Nice Scores Rog. I'm glad you finally got your upgrade done. S!