delta7

A recovery to a known safe point might be easiest but if you want to investigate and have the time then you can break it down 1) hardware Take out everything apart from motherboard, processor, memory,graphics card, harddrive with boot sector, keyboard and mouse and see if will boot

Just moved PC to a new desk and decided to clean out the insides - it was disgusting and full of dust - so just a reminder that its a good time to check your grear and give it a spring clean. Remember to take precautions against static I use a hairdrier set to cool to blow out the worst and then a natural bristle brush ( NOT NYLON !!!!!! ) to clean tricky areas

Its my belief that if you can suceed in a Fw then you will do well in most planes- it teaches you a lot about the importance of energy in a fight

Glad to help. Good to see another FW convert - it is a hard plane to master but deadly when used right S

Hi - I fly the FW a lot and I posted some materiel on the FW 190 in the vault a while ago which might be of interest http://www.dangerdogz.com/K9Vault/p13_sectionid/5/p13_fileid/233 http://www.dangerdogz.com/K9Vault/p13_sectionid/5/p13_fileid/228 For ACM then see here http://www.dangerdogz.com/K9Vault/p13_sectionid/5/p13_fileid/223 and go to SIMHQ , air and look for library, then look for articles by Andy Bush which describe scissors and rolling scissors, they are the best Iv found. http://www.simhq.com/_air/acc_library.html In general I have found that in 99% of the times if you are low and slow in a FW with a plane on your 6 then you will be shot down, it does not pick up speed well so you cant escape, all the bandit has to do is sit there and wait and he will get the shots he needs. Its only advantage in a dogfight is in its roll rate so thats why its good in scissors. You have 2 options in the scissors depending on what you want the outcome. If you wish to just try to survive and escape keep the roll as flat as possible, you use rolling scissors like gun jinks (e.g. sharp rudder or stick inputs) to put off his aim, while trying to extend towards friendlies. If you want to try to make the opponent overshoot then do wider rolls as it looses speed at any AoA

Glad hes back safe - S delta7

http://www.youtube.com/watch?v=uOqFIJeqP_U

Rattler I tried this with a silk coat on my dora but prefer the finish with future - the flash used for the P-47 photo accentuates the shine

thanks for the replies guys- Toner Im doing well , hope you are also mate . rattler - the p-47 was the best engineered kit Iv tried - many parts just clicked into place - the only hassle was the decals around the open rads on the fuselague BTW check out this for a zero , its going to be my next one as well http://www.hyperscale.com/2008/reviews/ ... ewbg_1.htm S delta7

tamiya p-47d razorback "lucky" just some light weathering to complete

here are some pics of the service and the memorial. It was a good turn out to pay respect to the fallen , even although the day was wet. I hope that they might get the BOB flight next year S delta

S Pooka and Rattler unfortunatly the flypast was cancelled due to poor weather - I have some pics of the service and will post these when I get some more of the memorial stone etc S

http://news.bbc.co.uk/1/hi/scotland/tay ... 606722.stm hope this is going ahead but weather is very overcast - will try to get some pics S Delta7

thanks for the replies - @ painless - it is modled with the gh radar - in the later stages of the war they flew in daylight so maybe wing leader markings for formation? @ coldgambler- once I work out my airbrush then Ill weather it a bit- there is a panel highlighter as well I might use - http://www.promodeller.com/promodellers ... ring-wash/ but I dont want to attempt this until Im ready S dave

@ painless - the yellow is not striped on the kit markings so Im just going to leave it as it is mate .

he can get htis one mate without upgrading his board http://www.novatech.co.uk/novatech/spec ... SAP-38505A its later generation to the 1950 and is comparable

http://mission4today.com/index.php?name ... cat=15#456 if you install the new march dlls from 1c forum you will have the option of choosing 8800 from video list in ils setup see post by kaya here http://forum.1cpublishing.eu/showthread ... 839&page=4 and this works in 4.08 as I have it installed there are other links in the thread to download it if the first does not work http://forum.1cpublishing.eu/showthread ... 839&page=5 put the files in your main il2 folder - save the existing ones somewhere safe first in case of problems

http://forum.1cpublishing.eu/showthread.php?t=2040

thanks for the help - I applied and got a free netgear from virgin.net so Im using this - waiting o the usb drongle for the pc upstairs to see if itll work , but installed and is working good on main pc , and got wii to work and its in a different room

superb pics - looks like a real scramble to move around - no wonder so few survived hits by flak or fighters , Iv read it was very hard to escape from Iv been around 6 months on and off on this I recon - very nice kit and fit was excellent but will be my first and last 1/72nd as some pieces are too small and fiddly - Ill stick to 1/48th - Iv a D9 waiting for me , just got it off e-bay , has metal and etch parts so should be nice build

just decals and small fiddly bits to finish- cockpit isnt great finish due to some excess glue on clear plastic

http://news.bbc.co.uk/1/hi/uk/7428455.stm turning it into luxery flats

I plan to get a wireless router for my son to allow him to access the net from his computer - any recommendations on hardware? - its an old house but his pc is almost directly above mine where the telephone line is. thanks dave

http://www.download.com/Digital-Photography/?tag=dir do you really think 166,031

according to this thread http://www.battle-fields.com/commscentr ... 99&page=13 the haxxorz have a working 3d compiler to get new planes into the game and are working on this - the same thread shows a BOB map that cannonUK is working on - so how is Oleg going to punt a new game when they are releasing new planes like MK1 spits and a BOB map to fly it on ? also who sets the parameters for the new planes and finally if they can introduce these then Im sorry but as sure as night follows day then some