1. DDz Quorum FoolTrottel Posted April 7, 2018 1. DDz Quorum Posted April 7, 2018 Started on this one. The plan is to make it look like ED809, see here ... 2 Quote
DD_Arthur Posted April 7, 2018 Posted April 7, 2018 Why aren't you working on your Swordfish? () Edit; thirty year old Revell kit? Thats going to be as rough as old boots FT. How much filler and sand paper have you got? Quote
1. DDz Quorum FoolTrottel Posted April 7, 2018 Author 1. DDz Quorum Posted April 7, 2018 Just now, DD_Arthur said: Why aren't you working on your Swordfish? () Edit; thirty year old Revell kit? Thats going to be as rough as old boots FT. How much filler and sand paper have you got? Plenty, I hope! In the end, the idea is to picture it while on it's final mission towards Berlin ... in the very dark of a November night... so, well, you get the picture! Hmm... yeah, I do have filler and sand paper plenty, and yeah, this is a challenge for sure! Dunno really why I am not working on the Swordfish... Started working on it just eight years ago, there's still plenty of time left, isn't there? 3 Quote
1. DDz Quorum DD_Fenrir Posted April 11, 2018 1. DDz Quorum Posted April 11, 2018 I'd ditch the roundel set from that decal sheet that came with the set FT; looks 'orrible! Quote
1. DDz Quorum FoolTrottel Posted April 11, 2018 Author 1. DDz Quorum Posted April 11, 2018 4 hours ago, DD_Fenrir said: I'd ditch the roundel set from that decal sheet that came with the set FT; looks 'orrible! Eehhmmm thanks, but that's the one that I scanned, edited and have printed on a decal sheet myself, so with the ID markings I want! I guess I could use the ones that were delivered... on a side note, what looks so horrible about them? Mind you, picture was taken under some weird yellowish LED lamp... so colour wise, it will be a bit off Quote
1. DDz Quorum DD_Fenrir Posted April 11, 2018 1. DDz Quorum Posted April 11, 2018 Excuse me whilst I remove the appendage terminating my leg from my cake-hole.... The B-type Roundels (just red & blue) look good, but the C-type (with white and yellow rings) appear ill-proportioned and the red - at least in the photo - doesn't appear to be centered correctly. Apologies if I offended Arjen. Quote
1. DDz Quorum FoolTrottel Posted April 11, 2018 Author 1. DDz Quorum Posted April 11, 2018 Just now, DD_Fenrir said: Excuse me whilst I remove the appendage terminating my leg from my cake-hole.... The B-type Roundels (just red & blue) look good, but the C-type (with white and yellow rings) appear ill-proportioned and the red - at least in the photo - doesn't appear to be centered correctly. Apologies if I offended Arjen. Offended? No ways! Never Ever! Apart from the lighting, there's also the angle in which the picture was taken vs the angle of the paper! And, iPhone 5 as camera, so all kinds of warping goes on Here's a (flatbed) scan of the original decal sheet... I think it shows where the problem comes from Quote
DD_Arthur Posted April 11, 2018 Posted April 11, 2018 Must be pretty desicated after three decades? Quote
1. DDz Quorum FoolTrottel Posted April 11, 2018 Author 1. DDz Quorum Posted April 11, 2018 Just now, DD_Arthur said: Must be pretty desicated after three decades? Just a tad ... lol Quote
1. DDz Quorum Sid Posted April 13, 2018 1. DDz Quorum Posted April 13, 2018 On 11/04/2018 at 9:02 PM, DD_Arthur said: Must be pretty desicated after three decades? Yummmm....coconut!! Quote
delta7 Posted April 15, 2018 Posted April 15, 2018 wow your a real masochist, the new revell and airfix lancs are pretty good and would build easier, but maybe you have a good reason for going with this one ? Quote
1. DDz Quorum FoolTrottel Posted April 16, 2018 Author 1. DDz Quorum Posted April 16, 2018 The only good reason I had for getting me this one is that it was available in the shop I was visiting Surely, one get can anything on line, but being in the shop, seeing the box, touching it, holding it, pondering over it, whether to get it or not, negotiating with the shop owner, to get some discount... (got it for 20 Euro's, it was priced at 29,90) I mean ... you can't really beat that with Internet Explorer, Opera, Firefox, Safari's 'put in basket, checkout' now can you? 1 Quote
2. Administrators Jabo Posted April 16, 2018 2. Administrators Posted April 16, 2018 Frankly, yes. Not that there’s anything wrong with your approach mateSent from my iPhone using Tapatalk Quote
1. DDz Quorum FoolTrottel Posted May 1, 2018 Author 1. DDz Quorum Posted May 1, 2018 Test fitting fuselage halves. Glued ... 2 Quote
delta7 Posted May 2, 2018 Posted May 2, 2018 I might have some spare decals if you need them, I built the newer revell a few years back Quote
1. DDz Quorum FoolTrottel Posted May 3, 2018 Author 1. DDz Quorum Posted May 3, 2018 5 hours ago, delta7 said: I might have some spare decals if you need them, I built the newer revell a few years back Thanks for the very nice offer, but I really want the CF-T / ED8090 markings! Quote
1. DDz Quorum FoolTrottel Posted July 1, 2018 Author 1. DDz Quorum Posted July 1, 2018 Progress! Tail section mounted, main landing gear constructed... 2 Quote
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.