Shadow Posted October 17, 2006 Posted October 17, 2006 I've got four HDs WD Raptor (150 GB, 10000 RPM SATA) Maxtor 6L300R0 Quote
1. DDz Quorum B16Enk Posted October 17, 2006 1. DDz Quorum Posted October 17, 2006 Curious... I'll do some research and report back, in the middle of a forum migration for a charity at the moment... Quote
Waldo.Pepper Posted October 17, 2006 Posted October 17, 2006 SATA, is it enabled in the BIOS, or is it disabled. Check the manual that came with the board on how to switch it on. Alternatively, you could go and buy a USB2.0 external enclosure for one of the drives. It would then end up being mobile to as well. Something like this... http://www.usb-2-0.com/usb-2-0-hd-enclosures.html Quote
BBloke Posted October 17, 2006 Posted October 17, 2006 I'm looking too Shadow but I doubt I'll find anything. Quote
Shadow Posted October 18, 2006 Author Posted October 18, 2006 A reply in my Abit forum post that I hadn't seen until today: "Well boys and girls i found out the problem The IC7 is not running the PCI clock correctly it should be set to 33.3MHz but it is not close enough In Bios set Fixed divider, until they get it right Telling us lame junk to try, if bios does not see a drive, a delay won't help. Must be sales with that stupid idea." So...Does anybody here know how to fine tune a PCI clock? I'll try the Bios Fixed Divider work around if I must. Quote
Shadow Posted October 23, 2006 Author Posted October 23, 2006 I got it figured out After a lot of futzing around with the BIOS. I found a small post in an obscure forum that mentioned how the IC7-G can't handle drives with the SataII spec. Quote
1. DDz Quorum B16Enk Posted October 23, 2006 1. DDz Quorum Posted October 23, 2006 Well I for one have learned... Quote
ns.png.271e220a6d546f1f4c2caeb85e919e2e.png)
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.