X-52 pro only going to 103% at max?

[Stingray]

Yo,

I picked up an X-52 pro a few weeks ago, it has been working great.

[Friar]

have you checked the set up in case a dead zone has got set by accident?

control panel/game devices/x52/properties (just in case you did'nt know, please excuse if you did!)

Friar

[Klinger]

As Friar said with the control panel. Also try unplugging the X52 at the USB. Plug it in, and it'll almost certainly have recalibrated itself.

Works for me.

[Snacko]

It sound to me like the game may have your throttle settings low.

[Stingray]

thanks for the replies, I'll check all these things when I get home today.

Snacko, I'll check out the IL-2 Joycontrol program, but I am curious what are the advantages of using it over the Saitek SST software?

[Snacko]

It lets you tweak each axis just for IL2.

[Stingray]

Yo, yep, unplugging/plugging it in worked

[T_O_A_D]

I calibrate my X-45 and it should work on the x-52, by only moving the throttle about 80% of its actual movement. This forces the software to be more responsive, and no matter what, it will read 110% in game since I can move the pots past the calibration point.

[Snacko]

Stingray, even if you have your problem solved, look into that IL2 Joy Control program.

[Vaca]

Stingray, I have had the same problem and the resolution is to delete a couple of reg keys (don't know them by heart), unplug the controler, replug the controller, move it on all axis (trothle, rotaries, slider, buttons) and then it should be resolved and work as before.

If you still have this problem let me know and I'll get you the registry keys which you need to delete.

~S~

Vaca

[Stingray]

Hi Vaca,

The solution for me was to simply unplug the joystick while the computer was on, and this caused the auto-calibration routine to start and it fixed everything.