Perfesser Posted Monday at 09:56 PM Posted Monday at 09:56 PM I was installing a damper on the Crosswinds pedals today and while there I was going around checking bolt tightness. Every one of the 8 bolts holding the center pivot pedestals were loose. Only those. If you have a set I recommend checking those. Quote
Squee7e Posted Monday at 10:45 PM Posted Monday at 10:45 PM I recommend using something like loctite 222 if the bolts are smaller than M12 (don't use the higher grades for small bolts). This should keep the bolts in place but allows you to loosen the bolts if required. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.