Highlander Posted August 12, 2007 Share Posted August 12, 2007 ~S~ I have had my Track IR4 for about 7 months and in the last week I have lost the distance at what it works well. It went from about 3 to 4 feet to about 18 inches now. If I get any farther away than that it only turns well to the right and not left or up and down. Quote Link to comment Share on other sites More sharing options...
delta7 Posted August 12, 2007 Share Posted August 12, 2007 things I would try 1) make sure you have the latest drivers 2) check your setup from here http://mission4today.com/index.php?name ... ow&kid=384 3) check that there are no unusual light sources like mirrors or pictures that can reflect light and effect it 4) if that does not work then go to naturalpoints forums for further support http://forum.naturalpoint.com/ubbthreads.php?Cat=0&C=2 good luck Quote Link to comment Share on other sites More sharing options...
Highlander Posted August 12, 2007 Author Share Posted August 12, 2007 Thanks Delta. I downloaded the latest driver and havent moved anything in the house in a month or so. It just seemed to come on all the sudden. I messed around with it last night and have it working but I have to be very close to it for it to work . I'll post a note on the natural Point forum and see If they can help too. Quote Link to comment Share on other sites More sharing options...
Crash Posted August 12, 2007 Share Posted August 12, 2007 Have you tried uninstall then reinstall?? My trackIR3 keeps losing the vector expansion Quote Link to comment Share on other sites More sharing options...
Highlander Posted August 13, 2007 Author Share Posted August 13, 2007 I have updated it uninstalled it reinstalled it. the problem seems to be that it has lost its ability to read the clip from farther than about 2 feet Quote Link to comment Share on other sites More sharing options...
Okie Posted August 13, 2007 Share Posted August 13, 2007 Highlander, Are you using the Track clip pro or the regular reflective clip? I'm still using the tir2 with an active led that I made. In the software there is an option to turn the led off on the camera. Mabye that has gotten turned off. This would only affect the reflective clip tracking. If your using the Pro clip then it should'nt matter. Try using a TV remote pointed at the camera in the tracking screen and see how far you can get a dot on the screen with it. Just point the remote at the camera and start moving it away while holding a button down on the remote. Mine will pick it up pretty well from 10' away. That would confirm the camera is picking up a signal well. If your using the Track clip pro and your getting a good dot with the remote test then I would suspect the clip. If your using the regular reflective clip then there may be a bad led on the camera. I have'nt used the Tir4 so I'm not familiar with the software but the mechanics of the thing should still be pretty much the same. That's my two cents Hope you get it sorted out. Quote Link to comment Share on other sites More sharing options...
Highlander Posted August 13, 2007 Author Share Posted August 13, 2007 ~S~ Okie I have the IR4 pro clip. I tried the tv remote and got to 10 feet or so .I cleaned the reflective strips and set the pixel size down and now it works to about 2 feet. I am going to order new reflector strips and see if that helps some more. Thanks M8 for the help. Jamie Quote Link to comment Share on other sites More sharing options...
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.