1. DDz Quorum Sid Posted March 27, 2022 1. DDz Quorum Posted March 27, 2022 After tonight's coops with the C6...excellent aircraft I think...I had a quick look at the cannon setup. The 2 x cannon in the gondola will fire on the cannon button along with the single one in the nose. The machine gun button fires the top 3 guns, the cannon button fires the bottom 3. However..... With the '20mm MG 151/20 gun' modification unselected (as below), all 3 cannon fire together until the ammo runs out (see piccie). With the '20mm MG 151/20 gun' modification selected, the 3 cannon fire together UNTIL the ones in the gondola overheat and jam (message comes up in tech). Then only the nose one fires. So, if you select the 20mm, short bursts only if you want to keep all three firing. 1 Quote
1. DDz Quorum Sid Posted March 27, 2022 Author 1. DDz Quorum Posted March 27, 2022 Also, the flaps..... As with all the Junkers aircraft, the flaps can be linked to the elevator pitch. This action means you can control the flaps via the elevator pitch control. With the Ju52 it gives it fantastic STOL capability as you can change the flaps angle by single degrees using the pitch wheel and chug along very slowly whilst descending. Ju87 and Ju88 have only 3 positions...raised, take off and landing but again are automatically selected considering the aircraft speed if linked to the elevator pitch. Ju88 - Take off - Start with elevator pitch neutral ie. 0 degrees. Select flaps down button once, this activates the flaps and links them to the elevator pitch. Then apply positive elevator pitch until you get 'take off' flaps. To raise the flaps, select the flaps up button to disengage the flaps from the elevator trim. Select neutral elevator trim and the flaps will raise. Landing - activate the flaps. Use the elevator pitch as above to select landing setting. Note though, you can't use the elevator pitch to adjust approach whilst the flaps/elevator pitch controls are linked and airspeed will determine what flap setting you get ie. too fast and the landing configuration won't be applied. Hope this helps 1 2 Quote
1. DDz Quorum Friar Posted March 28, 2022 1. DDz Quorum Posted March 28, 2022 Thanks for the follow up Sid, much appreciated. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.