[Looking for the password to enter DD on Il 2 BoS.]

Just what I said on the Title.  I used to fly on DD when it was iside CloD.  Now i find it out again inside Il 2  Bos but requesting a password. May I know it? Thanks.

 

 

 

 

[Trim on British planes]

Hy  everibody.

By a couple of weeks I have a problem ONLY on Danger Dogz   and British planes.   In 90% of the times I select to fly Red, I have to heavily correct the position of Rudder, and in a smaller measure the ailerons and elevator.  Rudder however  requires continous correction since it appears that cannot hold it. This is making impssible to fly. Just to make an example, pressing F8, and looking at the rudder it show an inclination of not less than 30-40 degrees on the right. Applied the appropriate correction, soon after the take off IT GOES AGAIN HEAVILY ON THR RIGT.

I need some help to solve this problem., a part from fliyng with 109'. 

I use a Logitech X 56 that I received free of charge by Logitech as a replacement from the SAITEK _ Logitech X 56, that had problems with calibration of the Joystick (rudder).

Thanks.

[Cliffs Of Dover Blitz Edition Discussion Thread]

Thanks a lot again.

Yesterday I tryed again to solve the problem, according to your advices, unfortunately without success. So ,I wrote  you the last note. I closed then the PC and I went for dinner. Later on I decided to ply for a while and.......everything was working perfectly, as before!! Hopefully the problem is solved. Please do not ask me  how and why.  It is working with both procedures.

However, if I can take advantage  of your kindness, I would like to clarify a couple of points.

1- why , most of the times there are no icons of the enemy MANNED planes, and they are showing up only when they are filling me up with bullets!  I can undertsnd the IA crates.....

2- Is Team Speak really working in DD?. Each time I'm joining I call for a radio check  but , so far, I never got a reply.

Thanks again for tour support and patience. Regards.

Ilario.

[Cliffs Of Dover Blitz Edition Discussion Thread]

Thank you for being so quick and precise.  ( I wish I would also the big professors of Logitech would be the same).

 

Following the procedure you suggested-step by step- and cecked in 3 different bases, no problems on 109E3/B either with your procedure and mine (I use to select straight the SC 250 etc.).  The problem, instead, continues  (is was not like that 10 days ago) on 109 E4/B.  By no mean I can load the SC 250  with both procedures: the result is always 4 smaller bombs.

So far I did not enter the  user.ini. I do prefer waiting for your reply to this note.

[Cliffs Of Dover Blitz Edition Discussion Thread]

On 5/14/2018 at 7:38 PM, FoolTrottel said:

Hello ilario,

That's all a bit strange... specifically that it changed since about a week ago.

Can't think of a change that was made to the server then, that could cause these issues.

Now I've tried to re-produce your error, and I did see 'strange' things, but that could be because at the first try I did not really pay attention to what button I was clicking, and when.

However, if follow this procedure, I always get the bomb load out I requested:

- Click the flag at the top (and make sure to 'leave your current aircraft)

- Click base (I picked Pihen Fighter)

- Select the 109 E-3/B (click on 'Plane' button if the type was already there in preview)

- Click on Load out, and under Weapon Sets select 'ETC-500 IXb Bomb Rack + GP Bomb, SC 250, Type 1, Body Type J' and under 'Bombs' select the proper type and set the fuse and delay.

- Click OK, OK and then Create.

After Create, there's no way to change the load out, you will have to hit the flag first, and 'leave your aircraft'...

 

Should this not be of help, then please report the exact base you spawn in, and what buttons you press and selections you make, step-by-step. Only then I can try and reproduce the issue - if it's there - and maybe either find a fix, or report it as a bug.

One other thing you could try should the above procedure not work for you: Open the file user.ini in Notepad, then browse down to the section named [Aircraft.Bf-109E-3B], and remove all lines below it, until the next section starts (a line marked with [ ). Repeat this for the other types you have a load out issue with. (First make a backup copy of the file, in case something goes wrong) 

Good luck!

Thankyou for being so quick and precise. (I wish I would also the big shots of Logitech would be the same!).  Following the procedure you suggested, checked in different bases , and on 109 E3/B no problems either with your procedure and with mine ( I use to select straight the SC 250 etc).  The problem instead continues to occur (it was not like that10 days ago) with 109 E4/B By no way I can load the SC250 with both procedures. The result is always 4 smaller bombs.

 

 

[Cliffs Of Dover Blitz Edition Discussion Thread]

Hy everibody. I just joined this site  with the hope to solve a problem, I Nomally play in Dangerdoz on  CloD Blitz (because I can see the icons of the planes My monitor is anly 23").

The isue is bomb loads on german planes.

1. I am referring to the bomb  SC250, type 1, bodyJ  with fuze C50(25) , 14 " delay whic I use to hunt ships.

2 - Until a week ago (early May) the above bomb could be loaded on either Me 110s and Me 109E/Bs.

3 - With my surprise  yesterady I could not carry the above bomb with the 109. But, most important,  is that with the same type of bomb loaded (as in para 1) on my 109, looking fram outside (Dangerdogz, F2), there werw four smaller bombs(50 Kg?) under the fuselage.  However IO used them to attack a ship obtaining only....a feather of smoke!

What's wrong? Please advise. Thanks for the help.