Jump to content

Recommended Posts

Just so you know you, I figured out that in your

confUser.ini

C:\Users\TOAD\Documents\1C SoftClub\il-2 sturmovik cliffs of dover\confUser.ini

You can Delete this section below, obviously back up the original first.

[ChatWindow]

0:-1=-posSize '0.004 0.848 0.242 0.152' -titleStr "Motor Controls" -alpha 130 -ualpha 0 -wrap -history 100

0:262144=-lay 1 -fnt 0 -clr 0

1:-1=-posSize '0.787 0.637 0.213 0.169' -titleStr "Secondary Controls" -alpha 130 -ualpha 0 -history 10 -timeout 15

1:5=-font 0

1:4=-font 0

1:7=-font 0

2:-1=-posSize '0.510 0.004 0.490 0.323' -titleStr Voice -border -alpha 130 -ualpha 0 -wrap -history 40 -timeout 30

2:2=-font 1

3:-1=-posSize '0.035 0.305 0.234 0.391' -titleStr "Информационное Окно" -title -border -alpha 50 -ualpha 25 -vscroll -wrap -history 100

4:-1=-posSize '0.023 0.031 0.234 0.391' -titleStr -history 100

5:-1=-posSize '0.023 0.031 0.234 0.391' -titleStr -history 100

6:-1=-posSize '0.023 0.031 0.234 0.391' -titleStr -history 100

7:-1=-posSize '0.023 0.031 0.234 0.391' -titleStr "Информационное Окно" -title -border -alpha 50 -ualpha 25 -vscroll -wrap -history 100

8:-1=-posSize '0.268 0.505 1.075 0.549' -titleStr NetStats -title -border -alpha 50 -ualpha 0 -custom

8:-2=-font 3 -color 139 -columnWidth '0.100 0.183 0.322 0.144 0.093 0.081' -columnSort 2

And then have clean screen shots, no clutter while flying.

If there is a clickable way while flying, I haven't found it.

there is in Tracks though.

post-468-0-79066800-1301763400_thumb.jpg

post-468-0-81923000-1301763413_thumb.jpg

Link to comment
Share on other sites

I downloaded the Russian version then converted it to English. Before converting it to English all the threads I read said to enter "AntiEpilepcy = 0" Under the [bOB] section to disable the freak out filter. Funny thing is after converting the entry "EpilepsyFilter=0" magically appeared in my conf.ini under the [bOB] section. Don't know which one is actually working so I left them both in there.

A couple of other tidbits:

VAC=1

if I am not mistaken this stands for Valve Anti Cheat in case anyone is interested.

;ProcessorAffintiyMask=15

I'm sure everyone knows what this is from the original, take away semicolon to enable it. Doesn't effect single core processors you can use this to determine which core or cores the game will run on. Here are the settings

=1 - core 0

=2 - core 1

=3 - core 0+1

=4 - core 2

=5 - core 0+2

=6 - core 1+2

=7 - core 0+1+2

=8 - core 3

=9 - core 0 + 3

=10 - core 1 + 3

=11 - core 0 + 2 + 3

=12 - core 2 + 3

=13 - core 0 + 2 + 3

=14 - core 1 + 2 + 3

=15 - core 0 + 1 + 2 + 3

So 15 would make the game run on all 4 core of your processor.

ShadowMapSize=5

Under the [core] section I have seen a few posted conf.ini file where people have turned this down to 4 or 3. I don't know how much of an effect this has on performance but you might want to try it out.

MSAA=0

Multisampling Antialiasing setting. I believe the max setting for this is 4 which corresponds to X8 in game.

Link to comment
Share on other sites

  • 1. DDz Quorum

Going to try the Affinity setting, this looks to be what is causing my CH Controls to not respond.

I think CPU may be maxing out on one core, and this core is where the CH Control is running.

Will check the EpilepsyFilter setting, used the in-game control to toggle that and have assumed it worked..

Link to comment
Share on other sites

  • 3 months later...

I downloaded the Russian version then converted it to English. Before converting it to English all the threads I read said to enter "AntiEpilepcy = 0" Under the [bOB] section to disable the freak out filter. Funny thing is after converting the entry "EpilepsyFilter=0" magically appeared in my conf.ini under the [bOB] section. Don't know which one is actually working so I left them both in there.

A couple of other tidbits:

VAC=1

if I am not mistaken this stands for Valve Anti Cheat in case anyone is interested.

;ProcessorAffintiyMask=15

I'm sure everyone knows what this is from the original, take away semicolon to enable it. Doesn't effect single core processors you can use this to determine which core or cores the game will run on. Here are the settings

=1 - core 0

=2 - core 1

=3 - core 0+1

=4 - core 2

=5 - core 0+2

=6 - core 1+2

=7 - core 0+1+2

=8 - core 3

=9 - core 0 + 3

=10 - core 1 + 3

=11 - core 0 + 2 + 3

=12 - core 2 + 3

=13 - core 0 + 2 + 3

=14 - core 1 + 2 + 3

=15 - core 0 + 1 + 2 + 3

So 15 would make the game run on all 4 core of your processor.

ShadowMapSize=5

Under the [core] section I have seen a few posted conf.ini file where people have turned this down to 4 or 3. I don't know how much of an effect this has on performance but you might want to try it out.

MSAA=0

Multisampling Antialiasing setting. I believe the max setting for this is 4 which corresponds to X8 in game.

Hey Mayhem In what file do you have '';ProcessorAffintiyMask=15'' I dont have that in any of my .ini files.

Thanks,

Link to comment
Share on other sites

  • 2. Administrators

unless they've changed something since i last played it, it doesn't do jack anyway......

last time i checked, it still wasn't running on multicore properly, it just spread one cores load over the 4.

Link to comment
Share on other sites

  • 2 months later...
  • 5 years later...

I shared this with Perf the otherday and he is liking it also.

Here is his forum link

http://stormofwar.org/phpBB3/viewtopic.php?f=15&t=502

 

 

Here is what I tweaked it too.

Just take all the files and drop them into your game folder loceted in Steam folder In C:drive

C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover

Or elsewhere if you have moved it like I have.

K:\Steam\steamapps\common\il-2 sturmovik cliffs of dover

inject fx - philstyle settings.zip

Example Picture below

INJFX.bmp

Then once installed the {ause Break key flips it on and off. with it off you can see better in low light if your monitor britness is turned up. But with it on the jaggys go away and the colors look more natural.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...