Jump to content

Teamspeak 3 Server Help


Beebop-RIP

Recommended Posts

OK, I finally decided that the HellHounds needed a comms upgrade and installed the TS3 Client and the TS3 Server on my machine..

I installed per the TS video:

http://www.youtube.com/teamspeak#p/u/1/qa8T6KM9_go

pausing the video at each step and then replaying to make sure I had done it correctly.

So once done, there I was on the new HH server as a SuperAdmin when all of a sudden it shut down. I tried to reconnect but it said it couldn't find "localhost:9987" so I tired the edited name I gave the server "Firey Furnace 2:9987" and it says it can't find that either. Now I have the server on the machine but can't connect! GRRRR!

Any ideas where I went wrong?

Thanks in advance.

Th' Bopster

Link to comment
Share on other sites

Well due to this thread I set one up myself.

I did it on a 32 bit and a 64 bit system.

Mine is running

toad465.servegame.org

fly

my guess is your router settings, but if your still just using local host, I don't beleive the router is even involved yet.

You did save your admin text it pointed out to not pad correct?

I've just shut it down a few times, and restarted it. no problems as of yet.

Link to comment
Share on other sites

my guess is your router settings, but if your still just using local host, I don't beleive the router is even involved yet.

I don't have or use a router. Just one machine.

You did save your admin text it pointed out to not pad correct?

I copied the info including the token directly from the DOS screen (Mark/Enter) into Notepad (Paste) and copied from there into the appropriate TS boxes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...