1. DDz Quorum Friar Posted November 9, 2007 1. DDz Quorum Share Posted November 9, 2007 Ok chaps, I now have an X52 Quote Link to comment Share on other sites More sharing options...
delta7 Posted November 9, 2007 Share Posted November 9, 2007 download and install the latest drivers http://www.saitek.com/uk/down/drivers2.asp make sure you folow install instructions - I think the stick has not to be connected when installing drivers no reason not to use the sst as it is usually very good and gives you extra functions - however you can just use the controls section in the game- make sure you go down to hotas section Quote Link to comment Share on other sites More sharing options...
BBloke Posted November 9, 2007 Share Posted November 9, 2007 I have tended not to use the SST in the past but I have found it to be better using it. If you consider plugging in another device or using your other stick along with the throttle then you may well run into reprogramming issues as a new device may use the ID that is current assigned to your X52. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 9, 2007 Author 1. DDz Quorum Share Posted November 9, 2007 I would prefer NOT to use the SST software, another process in the stack etc, so I am keen to get the most out of it via in-game assignment. Quote Link to comment Share on other sites More sharing options...
delta7 Posted November 9, 2007 Share Posted November 9, 2007 I would prefer NOT to use the SST software, another process in the stack etc, so I am keen to get the most out of it via in-game assignment. doesnt really take up much resources but its up to you mate Quote Link to comment Share on other sites More sharing options...
Tonar Posted November 9, 2007 Share Posted November 9, 2007 I only have thing thing mapped using my sst. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 9, 2007 Author 1. DDz Quorum Share Posted November 9, 2007 Pretty neat so far. a bit frustraiting though, trying to decide on the set-up that suits me best. so many buttons, so few fingers i am going to have a real go at getting it sorted tonight, roll on sunday! Quote Link to comment Share on other sites More sharing options...
GreyKnight Posted November 9, 2007 Share Posted November 9, 2007 Don't forget the most important mapping Friar, the trigger button... JOYSTICK ID1 BUTTON 1 --> Ctrl+E Glad I could help. GK Please note the word "Forget" was inserted by Greyknight after my post below, otherwise my post will seem silly, and thats not like me at all. Friar Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 9, 2007 Author 1. DDz Quorum Share Posted November 9, 2007 GK - you forgot "forget" LOL ! Quote Link to comment Share on other sites More sharing options...
GreyKnight Posted November 9, 2007 Share Posted November 9, 2007 When? Who? Where? Quote Link to comment Share on other sites More sharing options...
delta7 Posted November 9, 2007 Share Posted November 9, 2007 http://www.dangerdogz.com/k9vault/Downl ... EK_X45map/ this is my map - mode 1 is engine/takeoff/landing mode 2 is normal flight/fight mode 3 is bits and bobs Sheep Dip Mode you can edit the sheet to suit but gives a nice template to help you get started mate Sorry, couldn't resist Dave..Blame Colin he started it! Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 9, 2007 Author 1. DDz Quorum Share Posted November 9, 2007 Thanks dave, I am finding it a case of not knowing where to start, but hopefully tonight should get it sorted. Quote Link to comment Share on other sites More sharing options...
Streak Posted November 9, 2007 Share Posted November 9, 2007 Good luck, it's a bit of a pain at first, but well worth it . Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 9, 2007 Author 1. DDz Quorum Share Posted November 9, 2007 thanks greenstreaks, but now you have got me worried by your avatar...AGAIN...if the one in stockings was not enough, now this ! BBloke will be reporting you to the N.S.P.C.S (thats national society for prevention of crulety to sheep) Quote Link to comment Share on other sites More sharing options...
BBloke Posted November 9, 2007 Share Posted November 9, 2007 Blasphemy!!!! Quote Link to comment Share on other sites More sharing options...
Streak Posted November 9, 2007 Share Posted November 9, 2007 > I've recruited the flaming demon sheep to keep me company when I fly those darn Flaming Zeke's most of us seem to be fond of. I'MMMMMMMMMMMMMMMM BURNNNNNNNNNNNNNNNNNNINGGGGGGGGGGGGGGGGGGGGGGGG!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
Crash Posted November 9, 2007 Share Posted November 9, 2007 Friar if you do use SST then dont forget which mode you are in! Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 9, 2007 Author 1. DDz Quorum Share Posted November 9, 2007 well after spending a few hours changing things about and flying test missions i think i have got it sorted with out the use of the sst. the only thing i did want to do was to be able to control the map from the hotas, but i guess that will mean doing it via the sst as the mouse on the throttle does not seem to be recognized in the game set-up. but over all, i'm pretty pleased with how i have got it set up. many thanks for all your input guys, much appreiated, now if you will only sit in my sights so i can see if the trigger works, then that would be fine. Cheers colin. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted November 27, 2007 Author 1. DDz Quorum Share Posted November 27, 2007 I have been looking into using the sst software, to see what effect it has on my game and machine, and to see if the benefits outweigh the drawbacks. Am I correct in thinking that i need to assign a keyboad command to all the functions in game first, then using the sst software, assign these keys to the stick? I downloaded the il2 profile form the saitek webside and this is what it seemed to suggest. Cheers Colin. Quote Link to comment Share on other sites More sharing options...
delta7 Posted November 27, 2007 Share Posted November 27, 2007 I have been looking into using the sst software, to see what effect it has on my game and machine, and to see if the benefits outweigh the drawbacks. Am I correct in thinking that i need to assign a keyboad command to all the functions in game first, then using the sst software, assign these keys to the stick? I downloaded the il2 profile form the saitek webside and this is what it seemed to suggest. Cheers Colin. yes mate -you already have the key assignments in control section of game so you then use the SST to map a keyboard press to a joystick button/hat/switch - the x-45 map in my previous post shows the modes/key assigments/joystick button so is a useful template. note that some of my key assignments are not default so check them against what you have in game. the joystick and roteries and rudder are set up in the hotas section of the game Quote Link to comment Share on other sites More sharing options...
BBloke Posted November 27, 2007 Share Posted November 27, 2007 I found a very nice crib sheet for commands when I downloaded VAC software. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted December 13, 2007 Author 1. DDz Quorum Share Posted December 13, 2007 For those of you that are wise to the wonders of sst programming please excuse someone who is just finding it out for the first time. Quote Link to comment Share on other sites More sharing options...
BBloke Posted December 13, 2007 Share Posted December 13, 2007 Very neat idea Friar Quote Link to comment Share on other sites More sharing options...
Tonar Posted December 13, 2007 Share Posted December 13, 2007 Check out the big brain on Friar I am no where near that level of complex thinking when I am home. Quote Link to comment Share on other sites More sharing options...
Rattler Posted December 13, 2007 Share Posted December 13, 2007 So if you flash your navs, your gear drop? Silly cleric! Quote Link to comment Share on other sites More sharing options...
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.