1. DDz Quorum Painless Posted July 3, 2007 1. DDz Quorum Share Posted July 3, 2007 ~S~ Chaps, Sorry I didn't fly Tuesday as intended but my lovely new computer has gone tits up !! It is not sending a signal to the monitor, X52, and Keyboard . Tried to run old keyboard and monitor from it with no luck. Have carefully checked all wires and connectors , all seem ok ? Have a M8 comming over tomorrow to have a look and maybe find out whats gone wrong. Just when I thought everything was going great, this happens AHHHHHH !! ~S~ Computerless. Quote Link to comment Share on other sites More sharing options...
BBloke Posted July 4, 2007 Share Posted July 4, 2007 Big Bummer. Could be sounding like a dud mobo. Quote Link to comment Share on other sites More sharing options...
delta7 Posted July 4, 2007 Share Posted July 4, 2007 is it not still under warrenty mate ? - if so get in touch with supplier asap and dont muck around too much or they might get tetchy Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted July 4, 2007 1. DDz Quorum Share Posted July 4, 2007 Very first thing to try is a CMOS reset, often this will clear such a fault. Quote Link to comment Share on other sites More sharing options...
Tonar Posted July 4, 2007 Share Posted July 4, 2007 NOOOOOOOOOOOOOOOOO!!!!, Cucking Fumputers!!!!!! Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Painless Posted July 4, 2007 Author 1. DDz Quorum Share Posted July 4, 2007 ~S~, Chris, no m8, no bleep at all, no screen except for a "no signal" box if I physically turn monitor on. Dave, yes its still under warranty.(but what a pain setting everything up again !!) Rog, CMOS reset, ah I think thats what Haweyepierce is going to try tonight. He said he would bring a disc which would boot my BIOS (or something like that) Mike, dam right cucking fomputers M8 !!! ~S~ Brainless. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum B16Enk Posted July 4, 2007 1. DDz Quorum Share Posted July 4, 2007 Dig your manual up, the CMOS reset may just be a case of unplugging mains lead, moving a jumper (usually found in close proximity to the CMOS Battery) from pins 1 & 2 to 2 & 3 for a few seconds, then putting it back on pins 1 & 2 and re - applying power. Some boards however require battery removal, and/or leaving the jumper on for a 30 minute period (on really awkward ones). My system is still a little suspect, this 2nd hand board will light up when power is applied. But won't jump into life for up to five minutes after the button has been pressed, a bit like me in the mornings except quicker! Quote Link to comment Share on other sites More sharing options...
BBloke Posted July 4, 2007 Share Posted July 4, 2007 Had a big pain in the neck where my old mobo wouldnt play with a newer 3.2ghz chip. Quote Link to comment Share on other sites More sharing options...
guitarman68 Posted July 4, 2007 Share Posted July 4, 2007 Bloody things, took me 20 minutes last night to sort out my pc before coops, bloody game bloody track ir bloody x52 bloody pedals Then Rattler and Fireman handed my ass to me several times ,great flying by both of them learnt alot last night. Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Painless Posted July 4, 2007 Author 1. DDz Quorum Share Posted July 4, 2007 ~S~ Chaps, well my M8 "hawkeyepierce" came round, took the side off , wiggled a couple of things and now it bloody works fine Fingers crossed it was just a bit of "thermal creep !" LOL Will fill the case full of concrete if that doesn't cure it ! Thanks for your help Dogz ~S~ Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Friar Posted July 4, 2007 1. DDz Quorum Share Posted July 4, 2007 glad you got it sorted, you could have always brought it with you on saturday and we all could have had a lesson on how to take a pc apart hosted by Roger ! Quote Link to comment Share on other sites More sharing options...
1. DDz Quorum Painless Posted July 4, 2007 Author 1. DDz Quorum Share Posted July 4, 2007 ~S~ Colin Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted July 4, 2007 Share Posted July 4, 2007 Just read this post after I sent you an email about your puter. Glad you got it sorted m8. On the eve of my departure, I am starting to get excited. Second time today! Quote Link to comment Share on other sites More sharing options...
sged Posted July 5, 2007 Share Posted July 5, 2007 Glad things turned out well for ya Pain!! To all the dogs who go on "THE" sightseeingtrip, good luck, good flight, good weather...good everything....bring back some Spittie sounds for me Quote Link to comment Share on other sites More sharing options...
Enforcer57 Posted July 5, 2007 Share Posted July 5, 2007 You coulda gotten around all that by just doing the American remedy....hit it with a hammer. and you blokes going to Aingland, I just reckon you better dang well take a camera and get some good pix. Remember, prop planes in flight need a 1/250th shutter speed to not freeze the props. Get the sun behind you if you can, and stand facing the runway and Pivot your body as they fly past....pan with em damn it. And an iso speed adjustment of 400 is usually the best, though with digital jobs iso 200 is ok usually. I need to put a sticky on here about taking aircraft photos. Quote Link to comment Share on other sites More sharing options...
lil_sparrow Posted July 5, 2007 Share Posted July 5, 2007 Salute: My guru always says "If U'r going to move a computer be sure to lay it down with the slots down so nothing slips out of them. Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted July 5, 2007 Share Posted July 5, 2007 Thanks for the tips Enforcer. I'll keep these in mind. I am taking 2 camera's, a Cannon Digital Rebel with two lens (one 300mm) and my wife's mini Nikon. I'll try to get a picture of Chris farting in a vacumn. Quote Link to comment Share on other sites More sharing options...
sged Posted July 5, 2007 Share Posted July 5, 2007 Hey! What about the keys??? Quote Link to comment Share on other sites More sharing options...
Blairgowrie Posted July 5, 2007 Share Posted July 5, 2007 Sged, Confucius say man who loses key to girl's apartment, no get nookie. Quote Link to comment Share on other sites More sharing options...
.png.3326d5bbcb89fe2bcd3937259933ad13.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.