B16Enk

Hi and welcome to the 'pound'! We have no restrictions on posting of YouTube videos, which is probably good otherwise there'd be a riot!

Hi all. Apologies, I tried to leverage Amazon S3 for file storage as preparation for Web server move, and it did not go as planned. I am now reverting to local storage, this will result in occasional 'file not found' errors whilst they transition back. To the best of my knowledge nothing has actually been lost, but I do have backups. This will take a few hours to complete...

Very odd behaviour, digging deep with a big sharp shovel!

Crazy prices indeed, near double currently. but what choice do we have? Could have gone with an ATI equivalent but I have so little knowledge of them, as this will likely be my last GPU purchase for 6+ years it seemed a good investment..

So that 770 of mine? It made a loud popping noise Sunday night, and BSOD ensued on every boot (plus artifacts during boot). 4 years old... Replaced with a 1080SC EVGA model, 8GB DDR5X RAM and boy, night and day! So DCS is smooth, F15C at supersonic is so smooth... Shame about the $600 I had to drop to get back up and running 😄😂

Welcome back Roberts! X56 - I have an X55 and found the axes were terrible, it was sticking slightly and made DCS unflyable. The throttle has a habit of breaking wires, easily fixed (I loomed in new more beefy wires). Now they are Logitech the quality may be improved though... And they do provide a lot of buttons etc. So I grafted the X55 handle onto a MSFFB2, got 4 extra buttons and an extra axis plus force feedback. Same could be done for an X56

Decided to revisit my MSFFB2 X55 Franken stick. First image shows the new part I printed on the right, and the original part on the left. This enabled mounting the X55 handle much lower, closer to where the original MSFFB2 handle sat. Second image is the part mounted in the gimbal, third image is the X55 circuit board mounted inside the MSFFB2 case, and the wires connected to it (10 enemy teensy wires to be soldered!). Final image is it all lit up, and you can just make out the X55 USB cable exiting the MSFFB2 base Now back to the collective project, now I have found the ideal material (nylon as it is very strong, self lubricating, and very light).

After tolerating a Phenom (I bought off Snacko ages ago) for way too long I stumbled into a bit of luck My eldest (who works at same company as me and lives at home) took pity on his mum playing Sims on a non-gaming laptop, and dropped $800 on a new one for me. This liberated the same amount for me from my bonus, and I now have a Ryzen 1800X in an Asus ROG (yeah really lol) Crosshair V1 board with 16GB DDR4. Oh and my first SSD, a Samsung 960 Evo 256Gb. Yet to get the RAM running as well as it could, who new RAM timings could run to 100s of settings! (I got GSkill F4-3200C16D-16GVKB which is not on the QVL for the board). DCS is smooth, with my 4 year old 770GTX (perhaps I may get a 1070+ for my birthday) as is Assetto Corsa powered by my G920 Wheel setup (I was 'permitted to buy that out of my bonus last month to replace the one I sold to FruitBat LOL). IL2 in all its flavours is silky smooth too, now to get practiced again so I can get online.

Fixed. Download manager had been configured to post a new topic when new files were submitted, however no forum had been configured to post in, so system was posting into the Announcements forum that does not exist. Posts will now go into appropriate forums with {catname} as a prefix. Files always were available though! It was just the announcement of their availability.

Thanks Perf! I checked that linkout, quite an eye opener

Wow. July I posted this! I guess I should post an update: Base bit is being printed right now, will take over 20 hours to print The grey is a test fit for throttle grip, it works fine, will print final piece with textured (knurled) grip. Most of the black pieces are 15% carbon fibre, gives a nice matt yet metallic finish. Base is pure PLA and is high gloss black, the top of the base (with switches) will probably be the same matt finish carbon fire, Axis are hall sender for throttle and pitch, buttons are momentary 2 way toggles (like the X55) and this is all powered by a Bodnar board. Tension adjustment on the pitch axis, works very smoothly. Need to wire it all up when the base is printed, am creating bespoke PCBs for the Bodnar to switch interface, with diodes to do the matrix thing and give me 32 switches total. Only one pot so far, with a red knob.. steady Painless!

.. have now subscribed @$5 per month to remove adverts. Should all be working again now!

1.57 and 2.1 Alpha Dodging commitments - now that may take some doing!

Very nice, professional looking job there! Price compares favorably with the CH Pro throttle too. Sent from my iPhone using Tapatalk

Really? My Google foo is really off LOL, at least I do know they are not potentiometers [emoji4][emoji23] Sent from my iPhone using Tapatalk